RECALLS — MAKE · MODEL · YEAR
2018 Infiniti Q50 recalls
6 safety recall campaigns have been filed for the 2018 Infiniti Q50 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 03
- U.S. recalls
- 03
- Total campaigns
- 06
Transport Canada recalls
03- Powertrain#2024362
137 units affected
Issue: On certain vehicles, the driveshaft may not have been manufactured properly. As a result, the driveshaft could break and cause a loss of power to the wheels. Additionally, if the vehicle is parked and the parking brake isn't applied, the vehicle could roll away. Note: This recall only affects two-wheel-drive (2WD) models. Safety Risk: A loss of power to the wheels could increase the risk of a crash. A parked vehicle that rolls away could also create the risk of an injury or a crash. Corrective Actions: Nissan will notify owners by mail and advise you to take your vehicle to a dealership to replace the driveshaft.
- Visual System#2019459
126,195 units affected
Issue: On certain vehicles, the rear view camera system does not return to the default setting when the transmission is shifted to reverse. This could cause a reduction in rear visibility if a driver had previously adjusted the camera display. Canadian regulations require that the rear view image returns to its original setting each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rear view camera.
- Fuel System#2017375
958 units affected
On certain vehicles, and incorrect fuel pressure map was used in the Fuel Pump Control Module (FPCM) software as a result, the pressure regulator may fail to open to send fuel from the sub tank to the main tank. Under certain conditions, the fuel level in the main tank could be too low for the fuel pump to send fuel to the engine resulting in a loss of motive power, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will update the software for the Fuel Pump Control Module.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
03- POWER TRAIN:DRIVELINE:DRIVESHAFT#24V470000
Nissan North America, Inc. (INFINITI) is recalling certain 2011-2013 M56, 2012-2013 M35 Hybrid, 2014-2018 Q50, Q70 Hybrid, 2014-2019 Q70, and 2015-2019 Q70L two-wheel drive vehicles. The driveshaft can fatigue and break.
Risk: A broken driveshaft can result in a loss of drive power, or a vehicle roll away when the vehicle is in park without the parking brake applied. Both scenarios can increase the risk of a crash.
Remedy: Dealers will replace the driveshaft, free of charge. Owner notification letters were mailed August 13, 2024. Owners may contact INFINITI's customer service at 1-800-662-6200. INFINITI's numbers for this recall are R24A5 and R24A7.
- BACK OVER PREVENTION: SENSING SYSTEM: CAMERA#19V654000
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Risk: The lack of an image in the back-up camera display increases the risk of a crash.
Remedy: Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.
- FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP#17V476000
Nissan North America, Inc. (Nissan) is recalling certain 2016-2018 Infiniti Q50 and 2017 Infiniti Q60 vehicles equipped with a 2.0L engine. Incorrect Fuel Pump Control Module (FPCM) software may allow the fuel level in the main tank to be too low to supply fuel to the engine, causing the engine to stall while driving.
Risk: An engine stall can increase the risk of a crash.
Remedy: Nissan will notify owners, and Infiniti dealers will reprogram the Fuel Pump Control Module (FPCM) with corrected software, free of charge. The recall began August 29, 2017. Owners may contact Infiniti customer service at 1-800-662-6200.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2018 Infiniti Q50 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.