RECALLS — MAKE · MODEL · YEAR
2011 GMC Sierra 1500 Hybrid recalls
7 safety recall campaigns have been filed for the 2011 GMC Sierra 1500 Hybrid with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 07
- U.S. recalls
- 00
- Total campaigns
- 07
Transport Canada recalls
07- Airbag#2021028
295,974 units affected
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: General Motors will notify owners by mail and instruct you to take your vehicle to a dealer to replace the passenger-front airbag. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
- Airbag#2020591
9,660 units affected
Issue: Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: This recall is for vehicles that were originally sold or ever registered in certain areas of the United States that experience high or moderate levels of heat and humidity, and that were subsequently imported into Canada. Affected states: American Samoa and the U.S. Virgin Islands, Alabama, Arizona, Arkansas, California, Delaware, District of Columbia, Florida, Georgia, Guam, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Puerto Rico, South Carolina, Tennessee, Texas, the Northern Mariana Islands (Saipan), Virginia and West Virginia. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to a dealer to replace the passenger-front airbag inflator. Note: This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
- Airbag#2016307
7,809 units affected
This Safety Improvement Program was replaced by Transport Canada Recall No. 2020-591. General Motors Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in vehicles that were originally sold or ever registered in certain areas of the United States that experience high or moderate levels of heat and humidity, and that were subsequently imported into Canada. Dealers will replace the passenger inflator on affected vehicles. Owners who believe their vehicles may have been originally purchased or registered in the states listed below should contact a General Motors dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Affected states: American Samoa and the U.S. Virgin Islands, Alabama, Arizona, Arkansas, California, Delaware, District of Columbia, Florida, Georgia, Guam, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Puerto Rico, South Carolina, Tennessee, Texas, the Northern Mariana Islands (Saipan), Virginia and West Virginia.
- Electrical#2015002
10,651 units affected
On certain vehicles, a defect in the ignition lock cylinder could cause the key to stick in the "start" position if the vehicle interior temperature is sufficiently high. If the vehicle is operated in this condition and the interior temperature cools or the vehicle goes off-road or is subjected to some other jarring event, the key could move out of the "start" position, rotate past the "run" position and into the "accessory" position. If this were to occur, engine power, power steering and power braking would be affected, increasing the risk of a crash causing injury and/or damage to property. The timing of the key movement out of the “run” position, relative to the activation of the sensing algorithm of the crash event, may also result in the airbags not deploying in a subsequent collision, increasing the risk of injury. Correction: Dealers will inspect the steering column for identifying information and replace if necessary.
- Electrical#2014277
1,843 units affected
On certain vehicles equipped with an optional dual batteries, the owner's manual does not specify a maximum amperage rating for the auxiliary battery to the trailer wiring harness. If the circuit is overloaded, a fusible link may fail and could damage adjacent components, potentially resulting in a fire and increasing the risk of injury and/or damage to property. Correction: Dealers will install an 40 amp inline fuse and provide an owner's manual supplement containing maximum amp rating information. Note: Owners are advised not to use equipment that exceeds a 40 amp draw on the auxiliary battery trailer wiring.
- Steering#2011240
97 units affected
On certain vehicles, the intermediate steering shaft attaching bolts may not have received adequate tightening torque during vehicle assembly. This could allow the joint to separate, resulting in a loss of steering capability. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will tighten the intermediate steering shaft bolts to specifications.
- Suspension#2010454
3,945 units affected
On certain vehicles, the rear axle cross pin was improperly heat treated (during the manufacturing process) and could fracture and become displaced within the rear differential. As a result the driver may hear a banging noise emanating from the rear axle. Also, if the pin shifts out of position it could create an interference and cause the rear axle to lock. This could cause a loss of vehicle control, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the rear axle cross pin.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
00No recalls found for this make, model, and year.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2011 GMC Sierra 1500 Hybrid VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.