2019 Freightliner Business Class M2 recalls

• Steering#2023083February 20, 2023

  3,460 units affected

  Issue: On certain trucks, the joint connecting the steering arm to the drag link may not have been properly tightened. As a result, the joint could loosen and separate, causing a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the castle nut on the drag link taper joint. The nut will be checked for the correct torque, and tightened or repaired, as necessary.

• Tires#2022715December 12, 2022

  16 units affected

  Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the affected tires.

• Tires#2021706November 17, 2021

  948 units affected

  Issue: Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail. The corrective actions for this recall are under development. You will be instructed to bring your truck to a DTNA authorized service facility when a repair is available.

• Fuel System#2021271May 7, 2021

  731 units affected

  Issue: On certain vehicles, the fuel rail assembly could develop a leak. Note: This recall only affects vehicles equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your vehicle to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.

• Powertrain#2021060February 11, 2021

  787 units affected

  Issue: On certain trucks, the retaining clip on the transmission oil cooler line may fail. If this happens, the cooler line could detach from the radiator. This can result in a transmission fluid leak. Safety Risk: A transmission fluid leak could create a hazard for others by making the road slippery. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect and repair the transmission fluid cooler lines connections on the radiator tank.

• Structure#2020551November 12, 2020

  91 units affected

  Issue: On certain trucks, the welds that attach the trailer hitch may crack due to improper welding. As a result, the hitch could detach from the truck while towing a trailer. Note: This recall only affects certain trucks with trailer hitches installed by Commercial Truck Equipment. Safety Risk: A trailer that detaches from a truck could create a risk of a crash. Corrective Actions: Commercial Truck Equipment will notify owners by mail and instruct you to take your truck to a dealer to inspect the trailer hitch and repair or replace it, as necessary. You should stop using the trailer hitch until the inspection and repair have been completed.

• Powertrain#2020488October 16, 2020

  966 units affected

  Issue: On certain trucks equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), a component within the clutch assembly could fail. If this happens, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied. Note: This recall replaces FL-803 (Transport Canada recall 2018-714). Trucks that were repaired under that recall also require this repair. Safety Risk: Sudden and unexpected movement of the vehicle could create a risk of injury or a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the clutch and update the transmission software.

• Engine#2020408September 1, 2020

  979 units affected

  Issue: On certain trucks, the engine wire harness could be damaged by contact with various locations around the air compressor and the frame rail. If this happens, the engine could stall and you may not be able to restart it. Note: This recall only affects trucks built with a Detroit DD8 engine. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the clearance between the wire harness and engine, and to check for any damage to the wiring. If the wire harness is damaged, it will be replaced with a new harness that has a severe duty wrap and additional hardware for routing.

• Engine#2020365August 7, 2020

  230 units affected

  Issue: On certain trucks, the engine wire harness could be damaged by contact with various locations around the air compressor and the frame rail. If this happens, the engine could stall and you may not be able to restart it. Note: This recall only affects trucks built with a Detroit DD5 engine. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the clearance between the wire harness and engine, and to check for any damage to the wiring. If the wire harness is damaged, it will be replaced with a new harness that has a severe duty wrap and additional hardware for routing.

• Lights And Instruments#2020158April 14, 2020

  873 units affected

  Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.

• Wheels#2020123March 23, 2020

  20 units affected

  Issue: On certain trucks, the hubs on the steer axle may not contain any lubricant. This may result in wheel bearing damage, and in extreme cases, could cause a wheel to separate from the truck. Safety Risk: A wheel separation could increase the risk of a crash. A wheel that separates could also hit another person or vehicle. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a Daimler Trucks North America authorized service facility to inspect and repair the steer axle hubs as required.

• Brakes#2020086March 3, 2020

  231 units affected

  Issue: On certain trucks equipped with air disc brakes, the brake caliper mounting bolts may not be properly tightened. This could cause the caliper bolts to loosen and result in reduced brake effectiveness. Safety Risk: Reduced brake effectiveness could cause an increase in stopping distance and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to an authorized Daimler Trucks of North America Service Facility to inspect and replace the brake caliper bolts as necessary.

• Lights And Instruments#2019336July 4, 2019

  1,280 units affected

  Issue: On certain trucks equipped with electronic stability control (ESC), the brake lights may turn on when the automatic traction control (ATC) activates. Canadian regulations do not allow brake lights to turn on when the automatic traction control activates. Safety Risk: Brake lights that turn on when a vehicle is not slowing could confuse other drivers. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility. The truck will either be reprogrammed or retrofitted so the brake lights do not turn on when the automatic traction control (ATC) activates.

• Brakes#2019227May 15, 2019

  52 units affected

  Issue: On certain trucks equipped with air disc brakes, the brake caliper mounting bolts may not be properly tightened. This could cause the caliper bolts to loosen and result in reduced brake effectiveness. Safety Risk: Reduced brake effectiveness could cause an increase in stopping distance and create the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to an authorized Daimler Trucks of North America Service Facility to inspect and replace the brake caliper bolts as necessary.

• Steering#2018719December 20, 2018

  31 units affected

  On certain vehicles, the bolts that join the steering and tie rod arm to the steering knuckle may not have been properly tightened. This could lead to a separation of the tie rod arm and cause a loss of steering control. This could create a risk of a crash causing injury and/or property damage. Correction: Daimler Trucks North America Authorized Service Facilities will inspect the steering and tie rod arm bolts to ensure they are torqued correctly and install new fasteners as necessary.

• Powertrain#2018714December 19, 2018

  1,472 units affected

  This recall was replaced by Transport Canada Recall No. 2020-488. On certain vehicles equipped with an Eaton automated manual transmission and electronic clutch actuator (ECA), an internal component within the clutch assembly may have been manufactured improperly and could fail. If this occurs, the broken clutch components could prevent the transmission from disengaging or shifting to neutral. This could result in unintended vehicle movement, even if the parking brake is applied, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Authorized Service Facilities will recalibrate the Transmission Control Module (TCM) and replace components as necessary.

• Brakes#2018550October 9, 2018

  482 units affected

  On certain vehicles equipped with air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary.

• Steering#2018518September 19, 2018

  2,232 units affected

  On certain trucks, the steering shaft assembly may not have been installed correctly. This could cause a loss of connection between the steering wheel and the front wheels, resulting in a loss of steering control and creating the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America Authorized Service Facilities will inspect the steering shaft assembly and repair as necessary. Note: This is an expansion of recall 2018-386.

• Tires#2018517September 19, 2018

  54 units affected

  Certain trucks were equipped with Bridgestone M864, M860A or M854 wide-base tires, size 425/65R22.5, that may not conform to the endurance testing requirements of Canada Motor Vehicle Safety Standard (CMVSS) 119 - Tires for vehicles other than passenger cars. A manufacturing problem could cause a bulge or blister to be present in the sidewall of the tires. Over time, this could cause deterioration of the tire's structure and lead to a sudden tire failure that may increase the risk of a crash causing property damage and/or personal injury. Correction: Authorized Daimler Trucks North America service facilities will replace affected tires.

• Brakes#2018418August 9, 2018

  448 units affected

  On certain vehicles equipped with air disc brakes, the brake caliper mounting bolts may be incorrectly torqued. This could result in the caliper bolts loosening, which could lead to the caliper detaching. Insufficiently torqued fasteners may not provide adequate clamping force between the brake caliper and brake anchor plate potentially resulting in reduced brake effectiveness, which would result in increased stopping distances, increasing the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks of North America Service Facilities will inspect the bolts, and repair as necessary.

• Steering#2018386July 23, 2018

  334 units affected

  On certain trucks, the steering shaft assembly may not have been installed correctly. This could cause a loss of connection between the steering wheel and the front wheels, resulting in a loss of steering control and creating the risk of a crash causing injury and/or damage to property. Correction: Daimler Trucks North America will inspect the steering shaft assembly and repair as necessary.

Canadian data updated August 24, 2026

• ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE#24V924000December 11, 2024

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2015-2020 Freightliner Business Class M2 emergency vehicles equipped with certain Cummins diesel engines. The engine protection and inducement software may cause the engine to shut down unexpectedly.

  Risk: An unexpected engine shutdown can delay emergency responders and increase the risk of injury.

  Remedy: Cummins will update the electronic control module software and install a corrected data plate, free of charge. Owner notification letters were mailed February 5, 2025. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is F1012.

• WHEELS:RIM#22V919000December 12, 2022

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2023 Freightliner 114SD, 2023 Freightliner 122SD, 2020 Western Star 4700, 2019-2022 Western Star 4900, 2019-2023 Freightliner Business Class M2, and 2021 Freightliner Cascadia vehicles. The vehicles are equipped with tires that are not compatible with their 8.25-inch rims. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, "Wheels and Rims-Other Than Passenger Cars."

  Risk: Driving with tires that are not compatible with their rims can reduce tire performance, increasing the risk of a crash.

  Remedy: Dealers will replace the tires, free of charge. Owner notification letters were mailed June 2, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-962.

• FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL#21V326000May 7, 2021

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2021 Freightliner Custom Chass XC Chassis, 108SD, Custom Chass XB Chassis, Business Class M2, 114SD, and Western Star 4700 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.

  Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.

  Remedy: Dealers will replace the fuel rail and fuel lines, free of charge. Interim owner notification letters were mailed on June 21, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-886.

• POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES#21V067000February 11, 2021

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2014-2019 Freightliner Business Class M2 vehicles. The retaining clip that connects the transmission oil cooler line to the in-tank oil cooler may fail, possibly resulting in a transmission fluid leak.

  Risk: If a rapid loss of transmission fluid occurs while driving, it could result in a road hazard for other motorists, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will replace the retaining clip with a collar and clamp connection, free of charge. The recall began on April 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-874.

• POWER TRAIN:CLUTCH ASSEMBLY#20V642000October 16, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia, Business Class M2, 108SD, 114SD and 122SD and Western Star 4700, 4900 and 5700 vehicles. An internal component within the clutch assembly may fail, which in certain circumstances could allow the vehicle to move unexpectedly.

  Risk: Unintended vehicle movement van increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will update the software and replace the clutches, free of charge. DTNA issued owners an interim notification on December 7, 2020. Owner notification letters were mailed on May 28, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-865.

• ENGINE AND ENGINE COOLING#20V527000September 1, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2021 Freightliner 114SD, 108SD, and Business Class M2 vehicles. The engine harness wires may chafe at various locations around the air compressor and the frame rail. The damaged wires may short causing the engine to stall without any prior warning.

  Risk: An engine stall can increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect for adequate harness clearance and verify that the harness has not been damaged. Vehicles with a damaged harness will receive a new harness that consists of a severe duty wrapping and additional hardware. All repairs will be performed free of charge. The recall began October 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-860.

• ELECTRICAL SYSTEM:WIRING#20V466000August 7, 2020

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2021 Freightliner Business Class M2 trucks. The engine harness may contact and chafe at various locations around the air compressor and the frame rail. If the wires are damaged, they may short circuit, possibly causing an engine stall.

  Risk: A engine stall may increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect for adequate clearance between harness and engine, and for any engine harness damage. Vehicles with a damaged harness will receive a new harness. These repairs will be performed free of charge. The recall began October 5, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-858.

• POWER TRAIN#20V251000May 5, 2020

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Business Class M2 trucks equipped with Cummins PowerDrive EV drivetrains, part numbers 4000EV, 6000EV, and 7000EV. A connector within the wire harness may become unplugged and cause loss of communication between control modules, resulting in sudden loss of drive power and power steering.

  Risk: A sudden loss of drive power and loss of power steering increases the risk of a crash.

  Remedy: Per Cummins, all of the affected vehicles have been remedied. Owners may contact DTNA customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. DTNA's number for this recall is FL-850.

• EXTERIOR LIGHTING#20V214000April 14, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

  Risk: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

• POWER TRAIN:AXLE ASSEMBLY#20V176000March 23, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner Business Class M2 and Freightliner 108SD vehicles equipped with Meritor MX 120 EVO Front Drive Steer axles. The axles may have insufficient lubrication, which may result in damage to the wheel end bearings.

  Risk: If the bearings are damaged, the wheel may separate and cause a sudden loss of vehicle control, increasing the risk of crash.

  Remedy: DTNA will notify owners, and dealers will inspect and replace the wheel end components, as necessary, free of charge. The recall began May 12, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-846.

• SERVICE BRAKES, AIR:DISC:CALIPER#20V127000March 3, 2020

  Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Western Star 4700 and 5700, Freightliner Custom Chassis S2, Custom Chassis XB, and Custom Chassis XC vehicles equipped with air disc brakes. The brake caliper mounting bolts may have been insufficiently tightened.

  Risk: Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and repair the vehicles, free of charge. The recall began May 1, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-845.

• HYBRID PROPULSION SYSTEM#19V810000November 13, 2019

  Daimler Trucks North America LLC (DTNA) is recalling certain 2019 Freightliner Business Class M2 vehicles equipped with a certain PowerDrive EV electric drivetrain. Due to a software error, the VCU may activate the anti-roll back feature during slow moving or stop and go conditions, which can cause unexpected vehicle movement.

  Risk: Unexpected vehicle movement can increase the risk of a crash.

  Remedy: DTNA will notify owners, and Cummins dealers will update the VCU software, free of charge. The recall began November 25, 2019. Owners may contact Cummins customer service at 1-800-286-6467 or DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-838.

• POWER TRAIN:AXLE ASSEMBLY#19V443000June 11, 2019

  Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Business Class M2 and 2020 108SD vehicles equipped with Meritor MX 120 EVO Front Drive Steer axles. The axles may have insufficient lubrication, which may result in damage to the wheel end bearings.

  Risk: If the bearings are damaged, the wheel may separate and cause a sudden loss of vehicle control, increasing the risk of crash.

  Remedy: DTNA will notify owners, and dealers will inspect and replace the wheel end components, as necessary, free of charge. DTNA issued owners an interim notification on August 7, 2019. The recall began September 10, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-817.

• EQUIPMENT#19V398000May 29, 2019

  LGE Coachworks, Inc. (LGE Coachworks) is recalling certain 2018-2019 Ford E-450, F-550, and Freightliner M2-based vehicles equipped with ASA Electronics Voyager back-up camera displays. The displays may unexpectedly revert back to the factory default settings which may cause the camera image to be reversed.

  Risk: The driver may inadvertently turn the wrong direction to avoid an object behind the vehicle, increasing the risk of a crash.

  Remedy: ASA will notify LGE Coachworks owners, and dealers will replace the displays, free of charge. The recall began May 9, 2019. Owners may contact ASA customer service at 1-800-384-4400 or LGE Coachworks at 1-800-209-3985.

• POWER TRAIN:CLUTCH ASSEMBLY#18V903000December 19, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Business Class M2, Western Star 4700, 4900, and 5700 vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

  Risk: Unintended vehicle movement can increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will update the software, and repair any physical components, free of charge. DTNA issued owners an interim notification on February 16, 2019. The recall began July 31, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-803.

• STEERING#18V913000December 19, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

  Risk: Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

  Remedy: DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

• SERVICE BRAKES, AIR:DISC:CALIPER#18V703000October 5, 2018

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Freightliner Custom Chassis Corporation S2C 106 Cab, S2G Cab Chassis, XCL, XCM, XBS, XCP, XCR, Western Star 4700, 4900 and 5700 trucks. The brake caliper mounting bolts may have been insufficiently tightened.

  Risk: Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began December 3, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-794.

• STEERING#18V646000September 19, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, and Business Class M2 vehicles. The steering shaft assembly may have been installed incorrectly, which can cause a loss of connection between the steering wheel and the front wheels.

  Risk: A loss of connection between the steering wheel and front wheels can cause a loss of vehicle control, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and repair the steering shaft assembly, as necessary, free of charge. The recall began November 16, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-791.

• TIRES:SIDEWALL#18V641000September 19, 2018

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner 108SD, 114SD, 122SD and Business Class M2 trucks and Western Star 4700 and 4900 trucks, equipped with certain Bridgestone M854 tires with date codes 2418-2518, Bridgestone M860A tires with date code 2518, and Bridgestone M864 tires with date codes 2318-2418, all of size 425/65R22.5. The sidewall steel body cords may be exposed, which can cause unexpected, rapid air loss during use.

  Risk: Rapid air loss can increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect and replace the affected tires, as necessary, free of charge. The recall began October 8, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL790.

• SERVICE BRAKES, AIR:DISC:CALIPER#18V525000August 9, 2018

  Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Coronado, and Business Class M2 vehicles. During manufacturing, the brake caliper mounting bolts may have been insufficiently tightened.

  Risk: Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began October 5, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-783.

• STEERING#18V487000July 20, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Business Class M2 trucks. The steering shaft assembly may have been installed incorrectly, which can cause a loss of connection between the steering wheel and the front wheels.

  Risk: A loss of connection between the steering wheel and front wheels can cause a loss of vehicle control, increasing the risk of a crash.

  Remedy: DTNA has notified owners, and dealers will inspect the steering assembly installation, repairing it as necessary, free of charge. The recall began August 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-781.

• SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER#18V353000May 29, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen.

  Risk: If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.

• SERVICE BRAKES, AIR:DISC:CALIPER#18V251000April 19, 2018

  Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Business Class M2 trucks built with air disk brakes and spring suspension. The rear disk brake calipers may have been mounted in an incorrect orientation allowing the caliper to contact the suspension, reducing brake effectiveness.

  Risk: Reduced braking effectiveness can increase the risk of a crash.

  Remedy: DTNA will notify owners, and dealers will correct the orientation the rear brake calipers, free of charge. The recall began on June 14, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-767.