RECALLS — MAKE · MODEL · YEAR
2010 Freightliner Business Class M2 106 recalls
19 safety recall campaigns have been filed for the 2010 Freightliner Business Class M2 106 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 19
- U.S. recalls
- 00
- Total campaigns
- 19
Transport Canada recalls
19- Lights And Instruments#2020158
873 units affected
Issue: On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck. Safety Risk: Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash. Corrective Actions: Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
- Brakes#2019237
110 units affected
Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.
- Accessories#2017636
16,510 units affected
On certain vehicles equipped with Kidde fire extinguishers with black plastic handles and valves, the fire extinguishers may become clogged or require excessive force to activate. Also, the nozzle may detach from the valve assembly with enough force that it could cause injury, and fail to discharge. In case of fire, failure of the extinguisher to function could result in injury and/or property damage. Correction: Owners will be provided with instructions on how to inspect the fire extinguisher to see if it is recalled. Replacement fire extinguishers will be supplied by Kidde directly. Note: For more information about recalled fire extinguishers, please visit <a href="https://inmarmarketaction.com/kidde/Kidde284CA/">www.kidde.com</a>.
- Engine#2015336
172 units affected
On certain vehicles equipped with Cummins Westport ISL-G engines, excessive engine crankcase pressure could cause the vent tube assembly molded rubber adapter to detach from the breather. This could allow engine oil to come in contact with hot surfaces, increasing the risk of fire resulting in injury and/or damage to property. Correction: Dealers will install clamps at both ends of the adapter of the breather tube assembly and reprogram the Electronic Control Module (ECM) to improve diagnostic capabilities.
- Accessories#2015276
8 units affected
On certain mobile document shredder vehicles, installation of the shredding equipment combined with the increased weight of additional emissions components may have caused the vehicle weight to exceed the front gross axle weight rating (GAWR). This would result in vehicle being overloaded, potentially affecting vehicle handling characteristics, which could result in a crash causing injury and/or property damage. Correction: For vehicles built on the Freightliner M2 106 chassis, dealers will provide a new compliance label to reflect an increased GAWR (to 9000 lbs from 8000 lbs), and upgrade the front axle as necessary. For vehicles built on the Hino 258LP chassis, dealers will provide a new compliance label to reflect an increased GAWR (to 8500 lbs from 8000 lbs).
- Engine#2014050
113 units affected
On certain vehicles equipped with Cummins ISL G or ISX12 G engines, incorrect engine ECU programming could cause the exhaust system temperature to become elevated during cold weather operation. This could also cause flames to be emitted from the exhaust. As a result, nearby combustible material could be ignited, increasing the risk of a fire, injury and/or damage to property. Correction: Authorized Cummins service facilities will update software programming.
- Brakes#2012281
147 units affected
On certain trucks, the air tank mounting brackets may crack, which could allow the tank to detach from the vehicle. An air tank separating from the vehicle could strike another vehicle, a stationary object, or a bystander. As well, loss of an air tank would cause a loss of service brakes, which could increase stopping distances, possibly causing a crash. These issues could result in property damage and/or personal injury. Correction: Dealers will replace the air tank mounting brackets.
- Fuel System#2012080
11,923 units affected
On certain trucks equipped with a Detroit Diesel DD13, DD15 or DD16 engine, the support system for the high pressure fuel line (between the fuel pump and the fuel delivery rail) may be damaged during a service repair procedure. Incorrect torque applied to the dampener "P" clip fasteners may damage the fasteners, which could allow the clips to loosen. This could result in a cracked fuel line and a diesel fuel leak. Diesel fuel leakage may ignite on a hot engine surface and cause a fire. As well, diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. These issues could result in property damage and/or personal injury. Correction: Dealers will replace the high pressure fuel line and install a more robust fuel line support system.
- Other#2011411
1,412 units affected
On certain vehicles equipped with an MBE4000 (EPA07) engine, the intake air grid heater may short circuit and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will install an additional external relay to prevent battery connection to the grid heater when the vehicle is not running and when grid heater control signal is absent.
- Other#2011346
1,027 units affected
On certain vehicles, specific operating conditions (such as tight, successive, highly banked curves in opposite directions), could trigger unintended Electronic Stability Control (ESC) system intervention. As a result, the ESC may unnecessarily apply one of the front brakes in order to correct the perceived oversteer condition. This may cause the vehicle to deviate from the intended path, thereby increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ESC module.
- Seats And Restraints#2011010
39 units affected
On certain vehicles, the inboard (buckle end) seatbelt anchor backing plates do not meet the Daimler Truck North America (DTNA) design specifications. In the event of a crash, the seatbelt anchorage may not restrain the seat occupant as intended, which could increase the risk of personal injuries. Correction: Dealers will inspect the vehicles to determined if the modification has already been applied. On vehicles not yet modified, a longer seatbelt anchor bolt, two hardened washers and a jam nut will be installed.
- Other#2010251
2,318 units affected
On certain vehicles equipped with an MBE900 (EPA04 and EPA07) engine, the intake air grid heater may short circuit and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will install an additional external relay to prevent battery connection to the grid heater when the vehicle is not running and when grid heater control signal is absent.
- Steering#2010227
1,752 units affected
On certain vehicles, the weld around the steering shaft tube, which joins the splined tube to the non-splined intermediate tube, may be mislocated. An improperly located weld bead may allow the splined tube and non-splined tube to rotate relative one another during a low speed, high torque turn, resulting in a possible separation of the tubes. This could cause a loss of steering control which could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the steering shaft.
- Fuel System#2010144
3,194 units affected
On certain vehicles, should the fuel filter become restricted, the low pressure fuel flange may develop a crack resulting in a fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage, personal injury or death. Correction: Dealers will replace the low pressure fuel flange with a more robust component.
- Lights And Instruments#2010130
2,495 units affected
On certain vehicles, the stop lamps may operate intermittently during light braking applications. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the hydraulic brake light switch assembly.
- Emissions#2009326
33 units affected
The emergency vehicle applications that are subject of this recall are designed with a dash-mounted switch that enables the vehicle operator to inhibit the aftertreatment diesel particulate filter regeneration in environments where the operator believes it may be unsafe for elevated exhaust temperatures. Due to an issue with the logic in the Electronic Control Module (ECM) software in certain vehicles, the switch may not function correctly, leading the operator to believe that the switch is in "inhibit" mode when, in fact, it is not. As a consequence, the operator may unknowingly permit hot exhaust gases to exit the vehicle tailpipe, increase the risk of melting or burning of nearby surfaces, or a fire, causing property damage, personal injury or death. Correction: Cummins dealers will upgrade the ECM software.
- Fuel System#2009287
3,080 units affected
On certain trucks, the plastic low-pressure fuel line may fatigue crack and leak. Diesel fuel leakage may ignite on a hot engine surface and cause a fire, which could result in property damage, personal injury or death. As well, diesel fuel spilt on the roadway could endanger other road users. Correction: Dealers will replace the plastic low-pressure fuel line with a steel low-pressure line.
- Steering#2009223
158 units affected
On certain vehicles, an incorrect weld on the steering shaft tube assembly may allow the splined tube and the non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes. This could result in a loss of steering control and a crash cause property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the steering shaft assembly.
- Brakes#2009173
40 units affected
On certain vehicles, a quick release valve (QRV) contains a rubber diaphragm that may delaminate and cause leakage, a restriction, or blockage of the airflow, thereby affecting pressure delivery and release to the foundation brakes. Air trapped in the spring brake chambers could cause the parking brakes to apply slower than expected, which could allow the vehicle to roll away causing a risk of property damage, personal injury or death. Correction: Dealers will inspect and replace defective quick release valves.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
00No recalls found for this make, model, and year.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2010 Freightliner Business Class M2 106 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.