2019 Ford Mustang GT350R recalls

• Lights And Instruments#2026287June 10, 2026

  111 units affected

  Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 19C03 (Transport Canada recall no. 2019-064) may not have been done correctly. As a result, a second repair is required. On certain vehicles, a software problem could cause the instrument panel cluster screen not to display when the vehicle is started. As a result, you may not be able to see certain information about the vehicle, including the gear selection, speedometer, warning lights and malfunction tell-tales. Safety Risk: Warnings, gauges, gear selection and tell-tales indicators that don't display could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the instrument panel cluster software.

• Powertrain#2025707December 18, 2025

  55 units affected

  Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 20S21 (Transport Canada recall no. 2020-203) may not have been done correctly. As a result, a second repair is required. On certain vehicles, there is a problem with the warnings to tell a driver that the transmission is not in Park. When the ignition is turned off, with the driver door closed, the message and chime to warn that the transmission is not in Park are only active for 3 seconds. Instead, the chime should sound for 10 seconds and the message should display for 30 minutes. As a result, a driver could exit the vehicle without realizing that the transmission is not in Park. If this happens, the vehicle could roll away. Safety Risk: Unintended vehicle movement could increase the risk of injury and/or a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to reprogram the instrument panel cluster.

• Visual System#2025449September 3, 2025

  122,125 units affected

  Issue: On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse. Note: For certain models, this recall also affects incomplete vehicles. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the rearview camera.

• Electrical#2022278May 30, 2022

  3,563 units affected

  Issue: Under certain conditions, the powertrain control module (PCM) may incorrectly detect a fault in the transmission. If this happens, the reverse camera, reverse lamps, and different driver assistance technologies may not work properly. This includes traction control, forward collision warning, blind spot warning, and cross traffic indicator. Note: This recall only affects vehicles equipped with a 5.0 L engine and a manual transmission. Safety Risk: Reverse lamps that don't turn on could cause others not to recognize when a vehicle is backing up. A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. These issues and driver assistance technologies that don't work properly could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealership to update the powertrain control module (PCM) software.

• Brakes#2020647December 7, 2020

  99 units affected

  This equipment recall is for replacement parts that were sold or installed by Ford dealerships between October 2019 and August 2020. This recall is not being conducted under the requirements of the Motor Vehicle Safety Act. Issue: On certain cars, the brake pedal and bracket assembly could fracture if rapid and forceful pressure is applied to the brake pedal, as typically seen during track and competition driving. If this happens, there could be a loss of braking. Note: This equipment recall only affects the following brake pedal and bracket assembly part numbers: FR3Z-2455-AA FR3Z-2455-AB Safety Risk: A loss of brakes can create the risk of a crash. Corrective Actions: Ford will notify its dealers of this recall. While dealers will attempt to contact people who may have purchased a part affected by this recall, if you have had the brake pedal and bracket assembly replaced on your car, you should contact the dealer that sold or installed it to find out if it is affected by this recall. Any part that is affected by this recall will be replaced, free of charge.

• Lights And Instruments#2020485October 16, 2020

  833 units affected

  Issue: On certain vehicles, a software problem may cause the daytime running lamps (DRLs) to not turn on. Note: This recall only affects Shelby GT350 and Shelby GT500 models. Safety Risk: Daytime running lights that do not work could make the vehicle less visible to others and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to update the body control module (BCM) software.

• Powertrain#2020203May 11, 2020

  158 units affected

  Issue: On certain vehicles, there is a problem with the warnings to tell a driver that the transmission is not in Park. When the ignition is turned off, with the driver door closed, the message and chime to warn that the transmission is not in Park are only active for 3 seconds. Instead, the chime should sound for 10 seconds and the message should display for 30 minutes. As a result, a driver could exit the vehicle without realizing that the transmission is not in Park. If this happens, the vehicle could roll away. Safety Risk: Unintended vehicle movement could increase the risk of injury and/or a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a Ford dealer to reprogram the instrument panel cluster.

• Lights And Instruments#2019064February 12, 2019

  150 units affected

  Issue: On certain vehicles, the instrument cluster may be blank upon start-up. If this happens, the driver would not be provided with information and warnings about vehicle systems. Safety Risk: If the driver is not provided with information about the vehicle’s systems, there could be an increased risk of a crash. Corrective Actions: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the instrument cluster display reprogrammed.

Canadian data updated August 24, 2026

No recalls found for this make, model, and year.