RECALLS — MAKE · MODEL · YEAR
2016 Ford Focus BEV recalls
11 safety recall campaigns have been filed for the 2016 Ford Focus BEV with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 11
- U.S. recalls
- 00
- Total campaigns
- 11
Transport Canada recalls
11- Fuel System#2026338
110,138 units affected
Issue: On certain vehicles the recall repairs completed by a Ford dealer during recall 18S32 (Transport Canada recall no. 2018-577) may not have been done correctly. As a result, a another repair is required. On certain vehicles, the canister purge valve (CPV) may stick open and cause the fuel tank to deform. If this happens, the fuel gauge could read incorrectly and there could be a loss of power to the wheels. Note: This recall is an expansion of Transport Canada recall no. 2018-577. Vehicles repaired under that recall also require this repair. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software and, if necessary, replace the CPV. If the CPV is replaced, the dealer will inspect and replace the carbon canister, fuel tank and fuel delivery module, as necessary. In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.
- Powertrain#2026281
446 units affected
Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 18S07 (Transport Canada recall no. 2018-129) may not have been done correctly. As a result, a second repair is required. Note: This recall only affects vehicles equipped with a 1.0 L or 1.6 L engine and a manual transmission. On certain vehicles, repeated clutch slipping could cause the pressure plate to fracture. If this happens, transmission fluid could leak onto hot components in the engine compartment. Safety Risk: Oil that leaks onto hot components can create the risk of a fire. Additionally, an oil leak could create a hazard for others and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the system software to detect and prevent prolonged clutch slip. For certain vehicles, the dealer will also inspect and, if necessary, replace the clutch assembly.
- Electrical#2026005
138,783 units affected
Issue: On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair. Safety Risk: A short circuit can create the risk of a fire. Corrective Actions: To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.
- Electrical#2026004
193,627 units affected
Issue: On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Note: This recall only affects certain vehicles equipped with a 2.0 L engine. Safety Risk: A short circuit can create the risk of a fire. Corrective Actions: To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.
- Engine#2023704
7,164 units affected
Issue: On certain vehicles, the engine oil pump tensioner and/or the engine oil pump drive belt could fail and cause a loss of engine oil pressure. If this happens, the engine could fail and cause a loss of power to the wheels and a loss of power braking assist. Note: This recall only affects vehicles equipped with a 1.0L engine. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. A loss of power brakes can cause an increase in brake pedal force and lead to an increase in stopping distance. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the oil pump drive belt tensioner assembly. The dealer will also replace the oil pump drive belt.
- Powertrain#2018665
134 units affected
On certain vehicles equipped with a 1.0 L GTDI engine and 6-speed manual transmission, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping clutch, could result in pressure plate fracture, which could cause breach of the clutch cover and transmission housing, potentially leading to a transmission fluid leak. A transmission fluid leak, in the presence of an ignition source, could increase the risk of a fire. Correction: Dealers will evaluate the clutch for wear and replace as needed and will install updated software that will detect and prevent prolonged clutch slip. Note: This is an expansion of recall 2018-129.
- Fuel System#2018577
136,272 units affected
On certain vehicles, the Canister Purge Valve (CPV) may stick open and cause excessive vacuum in the fuel system that could deform the fuel tank. If this were to occur, it could cause: a malfunction indicator light (MIL) to illuminate, erratic readings on the fuel gauge, and/or the engine may stall. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the Powertrain Control Module (PCM) with new software and replace the CPV as necessary. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. Note: In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.
- Powertrain#2018129
513 units affected
On certain vehicles equipped with 1.0L GTDI or 1.6L GTDI engines and manual transmissions, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping clutch, could result in pressure plate fracture, which could cause breach of the clutch cover and transmission housing, potentially leading to a transmission fluid leak. A transmission fluid leak, in the presence of an ignition source, could increase the risk of a fire. Correction: Dealers will evaluate the clutch for wear and replace as needed and will install updated software that will detect and prevent prolonged clutch slip. For the Fusion model, dealers will replace the clutch assembly.
- Structure#2017039
1 units affected
On certain vehicles the floor pan may have been built with improperly welded left hand body apron joints. As a result the vehicle would have reduced front-end structural integrity, which could increase the risk of injury to occupants in the event of a frontal crash. Correction: Dealers will inspect the joints of the body apron, and will repair as required.
- Structure#2016475
9,877 units affected
Certain vehicles equipped with manual transmissions fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 206 – Door Lock and Door Retention Components. The rear hatchback can be unlocked and unlatched with a single press of the interior latch release control button while the vehicle is in motion (less than 7 km/h), which is contrary to the requirements of the standard. As a result, unrestrained occupants may be at greater risk of injury. Correction: Dealers will reprogram the Body Control Module with updated software.
- Powertrain#2016328
66 units affected
On certain Focus Electric vehicles, there may be increased friction and excessive wear of the differential pinion gear shaft due to an error in manufacturing. This could result in localized overheating and eventual fracture of the pinion shaft or pinion gears, which would result in a loss of motive power while driving and loss of the transmission park function without warning, which could allow the vehicle to roll away while in PARK, increasing the risk of injury and/or property damage. Correction: Dealers will install a new transmission differential assembly.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
00No recalls found for this make, model, and year.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2016 Ford Focus BEV VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.