2019 Ford F-150 Supercab recalls

• Lights And Instruments#2026288June 10, 2026

  12,774 units affected

  Issue: On certain trucks, the recall repairs completed by a Ford dealer during recall 20C03 (Transport Canada recall no. 2020-071) may not have been done correctly. As a result, a second repair is required. On certain trucks, a software problem could cause the daytime running lamps (DRLs) to remain on when switching the master lighting switch from the ''Autolamp'' position to the ''headlamp on'' position. Canadian regulations require the DRLs to turn off when the headlamps are switched on. Safety Risk: Daytime running lamps that stay on could cause glare for oncoming drivers and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your truck to a dealership to update the body control module software.

• Visual System#2025360June 27, 2025

  16,575 units affected

  Issue: On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC software.

• Visual System#2024779December 20, 2024

  218,614 units affected

  Issue: On certain trucks, the windshield wiper linkage could corrode and seize. If this happens, the windshield wipers may not work. Safety Risk: Windshield wipers that don't work could reduce visibility and increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your truck to a dealership to replace the windshield wiper linkage.

• Visual System#2022282April 21, 2022

  584 units affected

  Issue: On certain vehicles, an electrical problem with the rearview camera could cause it not to work properly. As a result, the rearview image may be distorted or not display at all. Note: This is an expansion of recall 20C19 (Transport Canada Recall 2020-454). Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the rearview camera.

• Lights And Instruments#2020071February 21, 2020

  50,989 units affected

  Issue: On certain trucks, there may be a problem with the software that controls the daytime running lights (DRLs). When the DRLs are on and the master lighting switch is rotated from the “Autolamp” position to the “headlamp on” position, the DRLs do not lower to parking light brightness. Canadian regulations require that the DRLs turn off when the headlights are turned on. Note: This only affects trucks equipped with LED headlights and the Autolamp feature (automatic headlights). Safety Risk: Lights that are too bright could cause glare for oncoming drivers. Corrective Actions: Ford will notify owners by mail and instruct you to take your truck to a Ford or Lincoln dealer to update the body control module (BCM) software.

• Electrical#2019568November 12, 2019

  30,073 units affected

  Issue: On certain trucks, a connection on the battery positive terminal could come loose. This can result in a loss of instrument panel displays, braking or steering assist, or cause the engine to stall. This issue could also create a high-resistance connection. Safety Risk: A loss of engine power and/or a loss of power to electrical systems could increase the risk of a crash. A high-resistance connection could create a fire risk. Corrective Actions: Ford will notify owners by mail and instruct you to take your truck to a Ford or Lincoln dealer to inspect the connection of the positive battery cable. It will be cleaned and tightened as necessary.

• Seats And Restraints#2019437August 29, 2019

  70,741 units affected

  Issue: On certain vehicles, seats with a manual recliner may not meet the strength requirements of Canadian regulations. A seatback with reduced strength may not properly restrain an occupant in a crash. Safety Risk: A seatback that moves in a crash could increase the risk of injury. Corrective Actions: Ford will notify owners by mail and instruct them to take their vehicle to a Ford or Lincoln dealer for an inspection of the driver and front passenger seat recliners. For 2020 model year Explorer and Aviator, dealers will inspect the rear outboard seats. The seat structures will be replaced as required.

• Other#2019420August 21, 2019

  5,327 units affected

  Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

• Electrical#2019174April 10, 2019

  230,182 units affected

  Issue: The connectors on the engine block heater cable may have been damaged when your truck was serviced for recall campaign 2018-718 (Ford #18S45). This could cause a short-circuit, which may result in overheated or melted wiring. Safety Risk: Overheated or melted wiring could create the risk of a fire. Corrective Actions: Stop use of your engine block heater immediately. Ford will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. Ford will send you another notice when replacement parts are available, and will ask you to take your vehicle to a dealer to install them. Do not use your engine block heater until the replacement parts are installed.

• Electrical#2018718December 20, 2018

  446,041 units affected

  Issue: Water and contaminants may damage and corrode the block heater cable connectors. This could cause a short-circuit, which may result in overheated or melted wiring. Safety Risk: Overheated or melted wiring could create the risk of a fire. Corrective Actions: Stop use of your engine block heater immediately. Ford will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. Ford will send you another notice when replacement parts are available, and will ask you to take your vehicle to a dealer to install them. Do not use your engine block heater until the replacement parts are installed.

Canadian data updated August 24, 2026

No recalls found for this make, model, and year.