RECALLS — MAKE · MODEL · YEAR
2021 Ford E450 recalls
6 safety recall campaigns have been filed for the 2021 Ford E450 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 05
- U.S. recalls
- 01
- Total campaigns
- 06
Transport Canada recalls
05- Engine#2025630
1,351 units affected
Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 20S73 (Transport Canada recall no. 2020-633) may not have been done correctly. As a result, a second repair is required. On certain vehicles, the insulation for the engine cover may not be positioned correctly. As a result, some surfaces inside the vehicle could get hot while the engine is running. Safety Risk: If a person touches a hot surface, there could be a risk of a burn injury. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain software on vehicles equipped with stationary elevated idle control (SEIC) or battery charge protect (BCP).
- Steering#2024085
998 units affected
Issue: On certain vehicles, the power steering pressure line may not be properly connected to the brake booster. As a result, power steering fluid could leak and cause a loss of power steering and power brake assist. Note: Vehicles that were inspected under recall 22S08 (Transport Canada recall 2022-073) also require this repair. This recall only affects certain E-series incomplete vehicles equipped with dual rear wheels. Safety Risk: A loss of power brakes can cause a potential sudden increase in brake pedal force and lead to an increase in stopping distance. A loss of power steering assist can cause a sudden increase in steering effort, especially at low speeds. Both could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the power steering pressure line and the brake booster line.
- Steering#2022073
3,864 units affected
Issue: On certain vehicles, the power steering pressure line may not be properly connected to the brake booster. As a result, power steering fluid could leak and cause a loss of power steering and power brake assist. Note: This recall only affects certain E-series incomplete vehicles equipped with dual rear wheels. Safety Risk: A loss of power brakes can cause a potential sudden increase in brake pedal force and lead to an increase in stopping distance. A loss of power steering assist can cause a sudden increase in steering effort, especially at low speeds. Both could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the connection between the power steering pressure line and the Hydroboost unit. The power steering line will be replaced if the connection is not secure.
- Engine#2020633
2,412 units affected
Issue: On certain vehicles, the insulation for the engine cover may not be positioned correctly. As a result, some surfaces inside the vehicle could get hot while the engine is running. Safety Risk: If a person touches a hot surface, there could be a risk of a burn injury. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the engine cover for gaps between the rubber seal and the insulation. If gaps are found, the dealer will install engine cover insulation patches, as necessary. The dealer will also update the powertrain software on vehicles equipped with Stationary Elevated Idle Control (SEIC) or Battery Charge Protect (BCP).
- Electrical#2020126
760 units affected
Issue: On certain vehicles, a wire harness in the rear of the vehicle could be damaged by contact with the vehicle frame. If this happens, the engine could stall and you may not be able to restart it. This can also cause the antilock brake system (ABS) not to work properly and the roll stability control (RSC) to turn off. Note: This problem may cause the check engine light and/or ABS and traction control warning lights to turn on. Safety Risk: A sudden loss of engine power could create the risk of a crash. Additionally, a loss of ABS and/or RSC could also increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to inspect the wire harness for damage. The dealer will apply protective tape over the area and ensure the harness is not touching nearby parts. Any damaged wires will be replaced.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
01- ELECTRICAL SYSTEM:WIRING#24V406000
North Central Emergency Vehicles (North Central) is recalling one 2021 Ford E-450 vehicle equipped with Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.
Risk: Overloaded electrical circuits can overheat, increasing the risk of fire.
Remedy: Weldon will update the firmware, free of charge. The owner notification letter is expected to be mailed June 2024. Owners may contact Akron Brass customer service at 1-800-228-1161 or North Central customer service at 1-320-395-2529.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2021 Ford E450 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.