Does the 2017 Ducati Xdiavel have any recalls?

Transport Canada lists 5 campaigns and the U.S. NHTSA lists 4 for the 2017 Ducati Xdiavel. Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

How do I know if a recall applies to my 2017 Ducati Xdiavel?

Recalls are matched by make, model and model year, but many cover only certain VIN ranges. Confirm with your manufacturer or dealer using your full VIN, or use the official Transport Canada or NHTSA lookup.

Are recall repairs free?

Yes. In both Canada and the United States the manufacturer must fix a recalled defect at no charge, through a franchised dealer.

RECALLS — MAKE · MODEL · YEAR

2017 Ducati Xdiavel recalls

9 safety recall campaigns have been filed for the 2017 Ducati Xdiavel with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls: 05
U.S. recalls: 04
Total campaigns: 09

Transport Canada recalls

Seats And Restraints#2023666December 14, 2023
561 units affected
Issue: On certain motorcycles, the passenger backrest could crack and break if it is used incorrectly or was not installed correctly. If this happens, a passenger could suddenly lose back support. Safety Risk: A sudden loss of back support could increase the risk of a crash or injury. Corrective Actions: Ducati will notify owners by mail and advise you to take your motorcycle to a dealership to inspect the installation of the passenger backrest. The dealer will adjust it, as necessary, and install a warning sticker to inform how to properly use the backrest.
Brakes#2021274May 7, 2021
1,037 units affected
Issue: On certain motorcycles, air may seep into the rear brake system over time. If this happens, there could be reduced rear braking. Safety Risk: Reduced braking could cause an extended stopping distance and increase the risk of a crash. Corrective Actions: Ducati will notify owners by mail and instruct you take your motorcycle to a dealer to install a new rear brake hose.
Structure#2021090February 19, 2021
308 units affected
Issue: On certain motorcycles, the side stand may break. If this happens, the motorcycle could fall over while it is parked. Safety Risk: A motorcycle that falls over could create a risk of injury to nearby people. Corrective Actions: Ducati will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the side stand, side stand bracket and locking plate.
Brakes#2017637December 18, 2017
1,081 units affected
On certain motorcycles, a crack within the polyphenilene sulphide (PPS) piston of the front brake master cylinder could occur. This could result in the master cylinder to not be able to generate sufficient hydraulic pressure, which could lead to a loss of braking capability of the front brake, increasing stopping distances and increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the PPS piston with one made from aluminum.
Powertrain#2016472September 26, 2016
224 units affected
On certain motorcycles, the final drive pulley retaining nut and the side stand plate fastening screw could loosen over time. If the final drive pulley nut becomes loose, the countershaft could spin on the belt primary drive pulley resulting in loss of power transmission to the rear wheel. If the lower side stand plate screw were to loosen, it could damage the side stand sensor switch, resulting in an engine stall, or if the bike were to be parked on the side stand, the side stand plate could deform/ break due to the excessive overload, causing the bike to fall. Both of these conditions could increase the risk of injury and/or damage to property. Correction: Dealers will replace the lower side stand plate fastening screw with a more resistant screw in order to increase the tightening torque, and install a new washer made with a harder material, and will tighten the final drive pulley retaining nut to an higher torque.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

SERVICE BRAKES, HYDRAULIC#21V315000May 4, 2021
Ducati North America (Ducati) is recalling certain 2017-2020 Monster 797, Monster 1200, Supersport, 2016-2020 XDiavel, and 2018-2020 Monster 821 motorcycles. Air may permeate the rear brake system.
Risk: Air in the system may reduce effectiveness of the rear brakes, increasing the distance required to stop and the risk of a crash.
Remedy: Dealers will install new rear brake hoses, free of charge. Owner notification letters were mailed on June 28, 2021. Owners may contact Ducati customer service at 1-888-391-5446.
STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND#21V085000February 17, 2021
Ducati North America (Ducati) is recalling certain 2016-2018 XDiavel S and XDiavel STD motorcycles. The side stand bracket may fatigue under load, resulting in failure of the side stand assembly and a potential for the motorcycle to fall when stationary on the stand.
Risk: A falling motorcycle can increase the risk of injury to persons nearby.
Remedy: Ducati will notify owners, and dealers will install a new side stand bracket, free of charge. The recall is expected to begin March 15 2021. Owners may contact Ducati customer service at 1-888-391-5446. Ducati's number for this recall is SRV-RCL-21-001.
STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND#16V729000October 12, 2016
Ducati North America (Ducati) is recalling certain model year 2016-2017 XDiavel motorcycles manufactured July 7, 2015, to June 22, 2016. The side stand plate lower fastening screw on the affected motorcycles may not be sufficiently tightened, causing the stand to fail and the bike to fall. Additionally, during normal use on the road, the loosening of the lower screw could cause damage to the side stand sensor switch, causing the engine to stall.
Risk: If the lower stand place screw becomes loose it can cause the bike to fall, or the engine to stall, increasing the risk of injury or a crash.
Remedy: Ducati will notify owners, and dealers will replace the side stand pivot and side stand plate fastening screw, free of charge. The recall began November 7, 2016. Owners may contact Ducati customer service at 1-800-231-6696. Ducati's number for this recall is RCL-16-003(B).
POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT#16V679000September 20, 2016
Ducati North America (Ducati) is recalling certain model year 2016-2017 Ducati XDiavel motorcycles manufactured July 7, 2015, to June 22, 2016. The affected motorcycles may have an insufficiently tightened final drive pulley retaining nut which may result in a loss of power transmission to the rear wheel.
Risk: A loss of power transmission to the rear wheel may increase the risk of a crash.
Remedy: Ducati will notify owners, and dealers will install a new washer under the final drive pulley retaining nut and increase the tightening torque, free of charge. The recall began on November 1, 2016. Owners may contact Ducati customer service at 1-800-231-6696. Ducati's number for this recall is RCL-16-003.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
Defects and recalls database — Transport Canada

Check a 2017 Ducati Xdiavel VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits →