Skip to content
VINscan

RECALLS — MAKE · MODEL · YEAR

2011 Dodge Nitro recalls

6 safety recall campaigns have been filed for the 2011 Dodge Nitro with Transport Canada and the U.S. NHTSA. Here is what both agencies say.

Canadian recalls
03
U.S. recalls
03
Total campaigns
06

Transport Canada recalls

03
  • Airbag#2020311

    188,249 units affected

    Issue: On certain vehicles, the emblem on the steering wheel could become loose. If this happens, the emblem or its retainers could become projectiles when the airbag inflates in a crash. Safety Risk: Loose parts that are projected toward the occupants when an airbag deploys could increase the risk of an injury. Corrective Actions: FCA Canada will notify owners by mail and instruct you to take your vehicle to a dealer to replace the airbag cover on the steering wheel.

  • Airbag#2013231

    25,546 units affected

    On certain vehicles, the airbag warning lamp may illuminate due to an electrical fault within the Occupant Restraint Control (ORC) module. As a result, the Active Head Restraints (AHR) may not deploy during a rear impact collision (where deployment is warranted), which could increase the risk of personal injury to the front seat occupants. Correction: Dealers will reprogram the Totally Integrated Power Module (TIPM) or replace the ORC module, as required.

  • Steering#2011224

    2,270 units affected

    Certain vehicles may have been built with a missing or incorrectly installed steering column pivot rivet. A steering column with a miss-installed rivet may not perform as intended in the event of a crash, which may increase the risk of personal injury. Correction: Dealers will inspect for steering column rivet presence and alignment, and repair as required.

Canadian data updated August 24, 2026

U.S. NHTSA recalls

03
  • AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE#20V396000

    Chrysler (FCA US LLC) is recalling certain 2008-2010 Chrysler Town and Country and Dodge Grand Caravan and 2007-2011 Dodge Nitro vehicles. These vehicles may have a loose or missing brand emblem in the center of the steering wheel. The loose emblem or the securing nuts for the emblem within the driver air bag module may become projectiles in the event of a driver air bag deployment.

    Risk: Projectiles as a result of driver air bag deployment in the event of a crash can increase the risk of injury.

    Remedy: Chrysler will notify owners, and dealers will replace the driver's air bag cover with a redesigned cover, free of charge. The recall began February 11, 2021. Owners may contact FCA US LLC customer service at 1-800-853-1403. Chrysler's number for this recall is W09.

  • ELECTRICAL SYSTEM#13V282000

    Chrysler is recalling certain model year 2011-2013 Sebring and 200 vehicles manufactured June 28, 2011, through December 13, 2012; model year 2011-2013 Dodge Avenger vehicles manufactured June 25, 2011, through January 14, 2013; model year 2011-2012 Dodge Nitro vehicles manufactured June 17, 2011, through December 15, 2011; and model year 2011-2012 Jeep Liberty vehicles manufactured June 17, 2011, through August 15, 2012. Electrical over-stress of a resistor in the occupant restraint control module may lead to the non-deployment of the active head restraints during a rear impact collision.

    Risk: In the event of a crash necessitating the deployment of the active head restraints , their non-deployment could increase the risk of injury.

    Remedy: Chrysler will notify owners, and dealers will flash the Totally Integrated Power Module (TIPM) or replace the occupant restraint control module, as needed, free of charge. The recall began on November 19, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N38.

  • STEERING:COLUMN#11V315000

    CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011DODGE JOURNEY, JEEP WRANGLER, CHRYSLER 200, CHRYSLER 200 CONVERTIBLE, DODGE AVENGER, DODGE NITRO, JEEP LIBERTY, DODGE CALIBER, JEEP COMPASS, JEEP PATRIOT, DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A MISSING OR INCORRECTLY INSTALLED STEERING COLUMN PIVOT RIVET.

    Risk: A MISSING OR INCORRECTLY INSTALLED RIVET COULD COMPROMISE THE ABILITY OF THE STEERING COLUMN TO SUPPORT THE OCCUPANT LOADS IN THE EVENT OF A FRONTAL CRASH, DECREASING THE EFFECTIVENESS OF THE FRONTAL IMPACT SAFETY SYSTEM. AS A RESULT, THE CONDITION MAY INCREASE THE POTENTIAL FOR INJURY IN A FRONTAL CRASH.

    Remedy: DEALERS WILL INSPECT FOR RIVET PRESENCE AND ALIGNMENT AND REPAIR THE STEERING COLUMN PIVOT AS REQUIRED, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.

Does this recall apply to my vehicle?

Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.

What to do

Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:

Check a 2011 Dodge Nitro VIN

A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.

Data sources and coverage limits