RECALLS — MAKE · MODEL · YEAR
2011 Chrysler 200 recalls
6 safety recall campaigns have been filed for the 2011 Chrysler 200 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 03
- U.S. recalls
- 03
- Total campaigns
- 06
Transport Canada recalls
03- Airbag#2016448
139,513 units affected
On certain vehicles in certain types of crashes, airbag and seatbelt pretensioner deployment capability may be lost due to a short in the front impact sensor wiring affecting Occupant Restraint Controller function. Failure of airbags and seatbelt pretensioners to deploy in a crash (when warranted) could increase the risk of injury. Correction: Dealers will replace the Occupant Restraint Controller module.
- Airbag#2013231
25,546 units affected
On certain vehicles, the airbag warning lamp may illuminate due to an electrical fault within the Occupant Restraint Control (ORC) module. As a result, the Active Head Restraints (AHR) may not deploy during a rear impact collision (where deployment is warranted), which could increase the risk of personal injury to the front seat occupants. Correction: Dealers will reprogram the Totally Integrated Power Module (TIPM) or replace the ORC module, as required.
- Steering#2011224
2,270 units affected
Certain vehicles may have been built with a missing or incorrectly installed steering column pivot rivet. A steering column with a miss-installed rivet may not perform as intended in the event of a crash, which may increase the risk of personal injury. Correction: Dealers will inspect for steering column rivet presence and alignment, and repair as required.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
03- SEAT BELTS:PRETENSIONER#16V668000
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Chrysler 200, 2010 Chrysler Sebring, 2010-2012 Dodge Caliber and 2010-2014 Jeep Patriot, Compass and Dodge Avenger vehicles. The Occupant Restraint Control (OCR) module may short circuit, preventing the frontal air bags, seat belt pretensioners, and side air bags from deploying in the event of a crash.
Risk: If the frontal air bags, seat belt pretensioners, and side air bags are disabled, there is an increased risk of injury to the vehicle occupants in the event of a vehicle crash that necessitates deployment of these safety systems.
Remedy: Chrysler will notify owners, and dealers will replace the OCR, free of charge. Interim letters informing owners that parts are not available yet were mailed on October 26, 2016. The recall began on August 15, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S61.
- ELECTRICAL SYSTEM#13V282000
Chrysler is recalling certain model year 2011-2013 Sebring and 200 vehicles manufactured June 28, 2011, through December 13, 2012; model year 2011-2013 Dodge Avenger vehicles manufactured June 25, 2011, through January 14, 2013; model year 2011-2012 Dodge Nitro vehicles manufactured June 17, 2011, through December 15, 2011; and model year 2011-2012 Jeep Liberty vehicles manufactured June 17, 2011, through August 15, 2012. Electrical over-stress of a resistor in the occupant restraint control module may lead to the non-deployment of the active head restraints during a rear impact collision.
Risk: In the event of a crash necessitating the deployment of the active head restraints , their non-deployment could increase the risk of injury.
Remedy: Chrysler will notify owners, and dealers will flash the Totally Integrated Power Module (TIPM) or replace the occupant restraint control module, as needed, free of charge. The recall began on November 19, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N38.
- STEERING:COLUMN#11V315000
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011DODGE JOURNEY, JEEP WRANGLER, CHRYSLER 200, CHRYSLER 200 CONVERTIBLE, DODGE AVENGER, DODGE NITRO, JEEP LIBERTY, DODGE CALIBER, JEEP COMPASS, JEEP PATRIOT, DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A MISSING OR INCORRECTLY INSTALLED STEERING COLUMN PIVOT RIVET.
Risk: A MISSING OR INCORRECTLY INSTALLED RIVET COULD COMPROMISE THE ABILITY OF THE STEERING COLUMN TO SUPPORT THE OCCUPANT LOADS IN THE EVENT OF A FRONTAL CRASH, DECREASING THE EFFECTIVENESS OF THE FRONTAL IMPACT SAFETY SYSTEM. AS A RESULT, THE CONDITION MAY INCREASE THE POTENTIAL FOR INJURY IN A FRONTAL CRASH.
Remedy: DEALERS WILL INSPECT FOR RIVET PRESENCE AND ALIGNMENT AND REPAIR THE STEERING COLUMN PIVOT AS REQUIRED, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2011 Chrysler 200 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.