BMW X4 recalls

• Engine#2026331July 8, 2026

  26,247 units affected

  Issue: On certain vehicles, the engine starter may not have been manufactured properly. As a result, the starter could overheat. Note: This recall is an expansion of Transport Canada recall no. 2026-040. Safety Risk: A starter that overheats can create the risk of a fire. Corrective Actions: To reduce the safety risk, BMW recommends not using the remote start function and not leaving the vehicle unattended with the engine running until the recall repairs have been completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the engine starter.

• Engine#2026040January 30, 2026

  6,958 units affected

  Issue: On certain vehicles, the engine starter may not have been manufactured properly. As a result, the starter could overheat. Safety Risk: A starter that overheats can create the risk of a fire. Corrective Actions: To reduce the safety risk, BMW recommends not using the remote start function and not leaving the vehicle unattended with the engine running until the recall repairs have been completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the engine starter.

• Electrical#2025499September 23, 2025

  17,761 units affected

  Issue: On certain vehicles, water could leak into the starter relay and cause it to corrode. If this happens, the relay could short circuit and the starter could overheat. Safety Risk: A short circuit and/or a starter that overheats can create a fire risk, even while the vehicle is parked and turned off. Corrective Actions: To reduce the safety risk, BMW advises that you should park your vehicle outdoors and away from other vehicles or structures until the recall repairs have been completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the engine starter.

• Label#2024544August 15, 2024

  587,250 units affected

  Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.

• Engine#2024468August 13, 2024

  78,381 units affected

  Issue: On certain vehicles, fluid from the positive crankcase ventilation (PCV) system could leak on the intake air hose. As a result, the fluid could enter the electrical connector for the water pump and cause a short circuit. Safety Risk: A short circuit can create the risk of a fire, even while the vehicle is parked and turned off. Corrective Actions: To reduce the safety risk, BMW advises you to park your vehicle outdoors and away from other vehicles or structures until the recall repairs are completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the water pump and electrical connector. The dealer will also install a shield on the connector.

• Powertrain#2023646December 6, 2023

  79 units affected

  Issue: On certain vehicles, the integrated transmission control unit (ITCU) may not be sealed properly. As a result, transmission oil could leak into the unit and cause the transmission gears to seize. If this happens, there could be a loss of power to the wheels. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the ITCU. The dealer will also inspect the transmission fluid and replace it, if necessary.

• Steering#2023614November 16, 2023

  22 units affected

  Issue: On certain vehicles, the steering gear may not have been manufactured properly. As a result, the steering gear could fail and cause a loss of steering control. Safety Risk: A loss of steering control could create the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the steering gear.

• Lights And Instruments#2021647October 22, 2021

  369 units affected

  Issue: On certain vehicles, the rear license plate bracket is not positioned correctly. As a result, the license plate lamps may not provide even lighting for the license plate. Canadian regulations have specific requirements for license plate lighting. Safety Risk: A license plate without even lighting may be difficult to read at night. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to modify the rear license plate bracket.

• Brakes#2021479August 3, 2021

  3,506 units affected

  Issue: On certain vehicles, a software problem could cause the vacuum pump to be damaged during engine starting. If this happens, there could be a loss of brake assist. This can cause an increase in brake pedal effort and increase the distance needed to stop the vehicle. Safety Risk: A sudden increase in brake pedal force could lead to an increased stopping distance. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to update the engine management software.

• Airbag#2021419July 8, 2021

  14 units affected

  Issue: On certain vehicles, the seat trim may not be properly attached to the front passenger seat. Over time, this could cause the occupant classification system (OCS) not to work properly. If this happens, the airbag system can turn off the passenger-front airbag even when an adult is sitting in the seat. Safety Risk: In a crash where an airbag is required, an airbag that does not inflate could increase the risk of injury for an adult passenger. Corrective Action: BMW will notify owners by mail and instruct you to make an appointment with a dealer to replace the front passenger seat cushion (including the occupant classification system).

• Visual System#2021078February 18, 2021

  2,263 units affected

  Issue: On certain vehicles, a software problem could cause the rearview camera image not to appear correctly in the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to update the rearview camera software, if necessary.

• Seats And Restraints#2020116March 19, 2020

  573 units affected

  Issue: On certain vehicles, there may be a problem with the front seat belt buckle sensors. This could cause the seat belt warnings to turn on, even if the front seat belts are buckled. If the driver ignores these warnings, the seat belt pretensioner and airbag systems may not function properly. Safety Risk: A seat belt pretensioner or airbag system that does not work properly in a crash could increase the risk of injury. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to check the front seat belt buckles and replace them, if necessary.

• Visual System#2019480October 1, 2019

  14,323 units affected

  Issue: On certain vehicles, the rearview camera does not return to the default settings when it turns on. This could make the rearview image difficult to see if a driver had previously adjusted the camera display brightness at or near the lowest setting, and contrast at or near the highest setting. Canadian regulations require that the rearview display returns to the default view each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rearview camera. Drivers are recommended not to adjust the display brightness at or near the lowest setting, and contrast at or near the highest setting, until this recall is completed.

• Steering#2019470September 25, 2019

  71 units affected

  Issue: On certain xDrive models, the front axle swivel bearing(s) (steering knuckles) may break due to a manufacturing defect. This could affect handling and cause reduced steering control. Safety Risk: A sudden change in handling and reduced steering control could increase the risk of a crash. Corrective Actions: None of the affected vehicles have been sold to retail customers. BMW will instruct dealers to replace the front axle swivel bearing(s) before the vehicles are sold.

• Airbag#2019177April 11, 2019

  2 units affected

  Issue: On certain vehicles, the instrument trim panel could cause the passenger-front airbag not to deploy properly in a crash. Safety Risk: A passenger-front airbag that does not work properly could cause increased injuries in a crash. Corrective Actions: BMW dealers will replace the instrument trim panel prior to vehicle sale.

• Engine#2018497September 13, 2018

  1,313 units affected

  On certain vehicles, a crankshaft sensor error may cause the engine to stall. This would result in a loss of motive power, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the crankshaft sensor. Note: This condition would result in the illumination of the check engine warning lamp and an “engine malfunction” message appearing in the instrument cluster. Note: This is an expansion of recall 2018-373.

• Brakes#2018366July 6, 2018

  779 units affected

  On certain vehicles, a problem with the rear brake system may cause gas bubbles to form in the brake fluid. This could cause a soft brake pedal feel and a reduction in brake performance, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will bleed the rear brakes.

• Airbag#2016461September 21, 2016

  395 units affected

  On certain vehicles, the housing of the driver's frontal airbag inflator may have been incorrectly welded during manufacturing and could separate from the base plate during an airbag deployment. If the vehicle were involved in a collision that warrants airbag deployment, metal fragments could be propelled toward vehicle occupants, which could increase the risk of injury. Correction: Dealers will replace the driver's frontal airbag.

• Seats And Restraints#2016242May 20, 2016

  30,023 units affected

  On certain vehicles, the lower anchor bars that are used for installing child seats using the European-ISOFIX-type rigid-style connector may become damaged during vehicle operation. If the lower anchorage bar(s) were to become damaged, this would increase the risk of injury to a child seated in a child seat using this style of connector if involved in a crash. Correction: Dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body. Note: Child restraint systems using LATCH-type flexible style connectors, which reflect the vast majority of child restraint systems used in Canada, do not cause this issue.

Canadian data updated August 24, 2026