RECALLS — BMW 8 SERIES
BMW 8 Series recalls
BMW 8 Series model years 2019–2025 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
10- Powertrain#2026391
826 units affected
Issue: On certain vehicles, the connection between the driveshaft and rear differential could wear. If this happens, there could be a loss of power to the wheels, or the vehicle could move when it's parked and the parking brake isn't used. Safety Risk: A loss of power to the wheels could increase the risk of a crash. A parked vehicle that rolls away could also create the risk of an injury or a crash. Corrective Actions: To reduce the safety risk, BMW recommends that you should always use the parking brake when you park. BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect the connection between the driveshaft and rear differential. The connection will be repaired or, if necessary, the driveshaft and rear differential will be replaced.
- Lights And Instruments#2026285
25,552 units affected
Issue: Under certain conditions, the windshield wiping system may not meet certain requirements of Canadian regulations. Safety Risk: This small error does not affect safety. Corrective Actions: This is not a recall. BMW has made changes to ensure that all new vehicles meet Canadian regulations.
- Label#2024544
587,250 units affected
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
- Powertrain#2023646
79 units affected
Issue: On certain vehicles, the integrated transmission control unit (ITCU) may not be sealed properly. As a result, transmission oil could leak into the unit and cause the transmission gears to seize. If this happens, there could be a loss of power to the wheels. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the ITCU. The dealer will also inspect the transmission fluid and replace it, if necessary.
- Structure#2023075
527 units affected
Issue: On certain vehicles, a software problem could allow you to close the windows and roof without the digital key inside the vehicle. Canadian regulations require a key to be in or near the vehicle when closing the windows or roof system. Safety Risk: A window or roof that can be closed without the digital key in or near the vehicle could create a risk of injury. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealership to update the electronic control unit software. To reduce safety risk, BMW recommends that you shouldn't use the digital key, and that the vehicle should only be operated with the key fob until the recall repairs are completed.
- Visual System#2021078
2,263 units affected
Issue: On certain vehicles, a software problem could cause the rearview camera image not to appear correctly in the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to update the rearview camera software, if necessary.
- Brakes#2021061
45 units affected
Issue: On certain vehicles, an internal part in the integrated brake system could fail during hard braking. If this happens, there would be a reduction in brake boost and the antilock brake system (ABS) would turn off. This can cause an increase in brake pedal effort that is required to stop the vehicle. Safety Risk: A sudden increase in brake pedal force and a loss of ABS braking could lead to an increase in stopping distance. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer replace the integrated brake system (hydraulic unit and master cylinder).
- Seats And Restraints#2020116
573 units affected
Issue: On certain vehicles, there may be a problem with the front seat belt buckle sensors. This could cause the seat belt warnings to turn on, even if the front seat belts are buckled. If the driver ignores these warnings, the seat belt pretensioner and airbag systems may not function properly. Safety Risk: A seat belt pretensioner or airbag system that does not work properly in a crash could increase the risk of injury. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to check the front seat belt buckles and replace them, if necessary.
- Electrical#2019626
243 units affected
Issue: On certain M5 and M8 models, the transmission wiring harness could become damaged and lead to a short circuit. As a result, the vehicle could suddenly shift to neutral while driving. Safety Risk: A sudden of loss power to the wheels could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the transmission wiring harness for damage and replace it if necessary. Additionally, the wiring harness will be rerouted and attached with different fasteners.
- Visual System#2019480
14,323 units affected
Issue: On certain vehicles, the rearview camera does not return to the default settings when it turns on. This could make the rearview image difficult to see if a driver had previously adjusted the camera display brightness at or near the lowest setting, and contrast at or near the highest setting. Canadian regulations require that the rearview display returns to the default view each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rearview camera. Drivers are recommended not to adjust the display brightness at or near the lowest setting, and contrast at or near the highest setting, until this recall is completed.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada