RECALLS — BMW 1 SERIES
BMW 1 Series recalls
BMW 1 Series model years 2010–2016 covered by at least one recall campaign. Pick a year to see the Canadian and U.S. campaigns side by side.
Choose a model year
U.S. NHTSA campaigns are listed on each year page, where they are queried live by model year. The Canadian list below covers every year together.
Transport Canada recalls
14- Label#2024544
587,250 units affected
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
- Engine#2023568
21,475 units affected
Issue: On certain vehicles, the variable camshaft timing (VANOS) adjustment unit housing bolts could loosen or break. As a result, the camshaft could become incorrectly adjusted and cause the engine to enter a reduced power mode (limp mode) or to stall while driving. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the VANOS bolts.
- Engine#2022095
98,111 units affected
Issue: On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat. Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair. Safety Risk: An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.
- Airbag#2020008
47 units affected
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
- Electrical#2019384
8,457 units affected
Issue: On certain vehicles, the connector for the blower motor regulator may corrode. If this happens, the wiring could overheat and melt. Potential warnings include a blower motor that does not work, a burning smell, or smoke in the cabin. Safety Risk: Wiring that overheats could create a risk of a fire. Corrective Actions: BMW will notify owners by mail and instruct them to take their vehicle to a dealer to replace the blower regulator wiring harness. Other components will be inspected for damage, and replaced as necessary.
- Engine#2018587
10,368 units affected
This recall was replaced by Transport Canada Recall No. 2021-711. On certain vehicles, the cooler for Exhaust Gas Recirculation (EGR) module may develop an internal leak and coolant could mix with diesel engine soot/sediment. In rare circumstances, this condition could result in smouldering particles and lead to the melting of the intake manifold, increasing the risk of a fire causing injury and/or damage to property. Correction: Dealers will inspect the EGR cooler, and if necessary, replace it. If it is determined that the EGR cooler has leaked internally, the intake manifold will also be replaced. The EGR pipe connecting the cooler to the manifold will be cleaned. Note: An operator may be alerted to this condition by one or more of the following symptoms: A warning symbol in the instrument cluster displaying a loss of engine coolant, a reduction in engine power, an unpleasant odour (exhaust gas), an unusual noise from the engine compartment, and/or smoke from the engine compartment.
- Engine#2017470
79,616 units affected
On certain vehicles equipped with the N52 6-cylinder engine, an electrical short could occur in the PCV valve heater due to manufacturing irregularities. If this occurs, the surrounding plastics could overheat, melt and potentially cause a fire, which could increase the risk of injury and/or damage to property. Correction: Dealers will replace the PCV valve heater.
- Powertrain#2017242
869 units affected
On certain vehicles, the rivet connections for the constant velocity (CV) joint of the rear driveshaft may have insufficient durability. Over time, this could cause the CV joint to break, resulting in a loss of propulsion which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the CV joint. Note: This recall supersedes recall 2017-049
- Powertrain#2017049
869 units affected
On certain vehicles, the rivet connections for the constant velocity (CV) joint of the rear driveshaft may have insufficient durability. Over time, this could cause the CV joint to break, resulting in a loss of propulsion which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will check the production date of the CV joint and, if necessary, replace the CV joint.
- Airbag#2016142
104,151 units affected
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
- Engine#2014170
21,811 units affected
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. In rare instances the engine could stall, increasing the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace housing bolts that break and perform associated repairs for 10 years/unlimited mileage from the vehicle's in-service date. Note: This applies only to vehicles not covered by recall 2014-127.
- Engine#2014127
20,022 units affected
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. This could increase the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace affected bolts.
- Electrical#2013048
65,685 units affected
On certain vehicles, the positive battery cable connection to the fuse box could fail while the vehicle is being driven. This could interrupt the vehicle’s electrical system, resulting in engine stalling, loss of vehicle propulsion and a loss of function of various vehicle systems, such as lights. A loss of vehicle propulsion and electrical vehicle systems, in conjunction with traffic and road conditions, and the driver’s reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the positive battery cable connector with an updated version.
- Seats And Restraints#2010196
6,399 units affected
On certain vehicles, the sound insulation in the "B" pillar (around the seatbelt pre-tensioner) may ignite during a crash severe enough to deploy the pre-tensioner. This could result in additional property damage and/or personal injury. Correction: Dealers will replace the front upper seatbelt and repair the "B" pillar sound insulation on both driver and passenger sides.
Canadian data updated August 24, 2026
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada