Audi E-Tron recalls

• Brakes#2026187April 15, 2026

  1,860 units affected

  Issue: On certain vehicles, the brake booster input rod may not have been tightened properly. As a result, the input rod could detach from the brake booster and cause a loss of brakes. Note: This recall is an expansion of Transport Canada recall no. 2024-670. For 2020-2024 model years, this recall affects both Sportback and SUV models. Safety Risk: A loss of brakes can increase the risk of a crash. Corrective Actions: Audi will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, tighten the brake booster input rod screw joint.

• Visual System#2025713December 19, 2025

  30,276 units affected

  Issue: On certain vehicles, a software problem could cause the rearview camera image not to appear on the display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Audi will notify owners by mail and advise you to take your vehicle to a dealership to update the rearview camera software.

• Brakes#2024670November 4, 2024

  98 units affected

  Issue: On certain vehicles, the brake booster input rod may not have been tightened properly. As a result, the input rod could detach from the brake booster and cause a loss of brakes. Note: This recall replaces Transport Canada recall no. 2024-484. Vehicles that were repaired under that recall don't require this repair. Safety Risk: A loss of brakes can increase the risk of a crash. Corrective Actions: Audi will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, tighten the brake booster input rod screw joint.

• Brakes#2024484August 19, 2024

  12 units affected

  This recall was replaced by Transport Canada recall no. 2024-670. Issue: On certain vehicles, the brake booster input rod may not have been tightened properly. As a result, the input rod could detach from the brake booster and cause a loss of brakes. Safety Risk: A loss of brakes can increase the risk of a crash. Corrective Actions: Audi will notify owners by mail and advise you to take your vehicle to a dealership to replace the brake booster.

• High Voltage#2023686December 20, 2023

  2,016 units affected

  Issue: On certain vehicles, a problem with high-voltage battery module(s) could cause the high-voltage battery to overheat. Safety Risk: A high-voltage battery that overheats could create a fire risk. Corrective Actions: Audi will notify owners by mail. As an interim repair, a dealer will inspect and, if necessary, replace the battery modules. Once the final repair is available, you will need to return to a dealership to install a software update for the high-voltage battery. This software will monitor the high-voltage battery and warn you if it detects a problem. To reduce the safety risk, Audi recommends that you set the maximum charge setting of your vehicle at 80% until the final recall repairs are completed.

• Accessories#2023659December 13, 2023

  12,469 units affected

  Issue: Under certain conditions, the plug for the 220 V compact vehicle charging cable could become damaged by the house power outlet. As a result, the cable could overheat while charging. Note: This recall only affects electric and plug-in hybrid electric (PHEV) models. Safety Risk: Wiring that overheats could create a fire risk. Corrective Actions: Audi will notify owners by mail and advise you to take your vehicle to a dealership to replace the vehicle charging cable. For unsold vehicles, the dealer will remove the charging cable before they are delivered to consumers.

• Visual System#2022611October 26, 2022

  880 units affected

  Issue: On certain vehicles, the infotainment main unit in the center console could fail. If this happens, the display screen will not turn on when you start the vehicle and the rearview camera image will not appear when backing up. Canadian regulations require the rearview image to display when the transmission is shifted into reverse. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Audi will notify owners by mail and instruct you to take your vehicle to a dealership to replace the infotainment unit.

• Visual System#2022565October 5, 2022

  19,006 units affected

  Issue: On certain vehicles, a software problem could cause the rearview camera image not to appear on the display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Volkswagen will notify owners by mail and instruct you to take your vehicle to a dealership to update the infotainment software.

• Seats And Restraints#2021486August 4, 2021

  7,198 units affected

  Issue: On certain vehicles, the passenger seat belt assemblies may contain defective automatic locking retractors (ALR). As a result, the seat belts may not properly lock to secure a child seat. Safety Risk: A seat belt that is used to secure a child restraint but is not properly locked could increase the risk of injury in a crash. Corrective Actions: Audi will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the seat belts. They will be replaced, if necessary.

Canadian data updated August 24, 2026