RECALLS — MAKE · MODEL · YEAR
2010 Altec AH85 recalls
11 safety recall campaigns have been filed for the 2010 Altec AH85 with Transport Canada and the U.S. NHTSA. Here is what both agencies say.
- Canadian recalls
- 05
- U.S. recalls
- 06
- Total campaigns
- 11
Transport Canada recalls
05- Other#2016057
16 units affected
Certain Altec aerial devices may have been manufactured with a defective Pulsar coil. The Pulsar coil could short causing unwarranted movement of the aerial device increasing the risk of injury to the operator. Correction: Altec will replace the affected Pulsar coils.
- Accessories#2014309
7 units affected
On certain aerial devices installed on utility service vehicles (to elevate personnel in order to facilitate working on overhead service lines, for tree trimming, etc.), water ingress into the lower boom fiberglass inserts could allow a conductivity path through the boom from the boom elbow down to the chassis. If the boom elbow were to come in contact with, or in close proximity to, an energized conductor while persons on the ground are touching or in close proximity to the chassis, an increased risk of injury due to electrocution would result. Water ingress could also compromise the fiberglass insert glue joint, potentially leading to undesirable boom motion due to looseness of the joint, which could increase the risk of injury and/or damage to property. Correction: Altec will replace affected lower booms. Owners may contact Altec at 1-877-462-5832.
- Electrical#2014130
8 units affected
On certain aerial devices installed on utility service vehicles (to elevate personnel in order to facilitate working on overhead service lines, for tree trimming, etc.), incorrect sealing plugs could allow water ingress into the aerial control, causing electrical shorts. This could allow the aerial device to move unexpectedly, which could result in property damage and/or personal injury. Correction: Altec will supply owners with a replacement electrical harness incorporating seal plugs as well as installation instructions. Owners may contact Altec at 1-877-462-5832.
- Structure#2013308
3 units affected
On certain aerial devices installed on utility service vehicles (to elevate personnel in order to facilitate working on overhead service lines, for tree trimming, etc.), the current leakage monitoring system cable may be improperly secured. This could allow a conductivity path through the boom and increase the risk of injury due to electrocution. Correction: Altec will notify owners, informing them to inspect and properly secure the cable. Owners may contact Altec at 1-877-462-5832.
- Other#2011384
1 units affected
On certain truck-mounted telescopic articulating aerial devices, the platform leveling system could fail. This could cause unintended platform movement, which could result in property damage and/or personal injury. Correction: Authorized service centers will replace the platform leveling system's electrical solenoid.
Canadian data updated August 24, 2026
U.S. NHTSA recalls
06- ELECTRICAL SYSTEM#16V023000
Altec Industries (Altec) is recalling certain model year 2010-2015 AH75, AH85, and AH100 Aerial Devices manufactured January 10, 2008, to December 31, 2015. The affected units have a hydraulic pressure control valve that may allow the aerial device to move even when not told to do so.
Risk: An aerial device that moves unexpectedly increases the risk of injury to the operator.
Remedy: Altec will notify owners, and dealers will replace the hydraulic pressure control valves, free of charge. The recall began on March 15, 2016. Owners may contact Altec customer service at 1-205-991-7733.
- EQUIPMENT#14V308000
Altec Industries, Inc. (Altec) is recalling certain model year 2009-2012 AH75, AH85, and AH100 Aerial Devices manufactured October 2009 through December 2012. The affected devices may allow electricity to be conducted through the boom due to water entering into the fiberglass layers. Additionally, the joint connecting the fiberglass insert and the steel boom components may fail.
Risk: A fiberglass lower boom insert that can conduct electricity increases the risk of electrocution to the operator should the boom contact a power line. If the joint between the fiberglass insert and the steel boom component fails, the boom may fall, putting the operator at an increased risk of injury.
Remedy: Altec will notify owners, and dealers will do supplemental dielectric testing and replace the lower boom, free of charge. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 598.
- EQUIPMENT:ELECTRICAL#14V001000
Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AH75, AH85, and AH100 vehicles manufactured from April 1, 2010, through November 20, 2013. Moisture may get into the control module plug and result in inadvertant movement of the boom or platform.
Risk: The unexpected movement increases the risk of injury to the operator or those nearby.
Remedy: Altec will notify owners and dealers will replace the control module wiring harness, free of charge. The recall will begin on April 14, 2014. Customers may contact Altec at 1-877-462-5832. Altec's number for this recall is CSN 592.
- ELECTRICAL SYSTEM#13V378000
Altec is recalling certain model year 2005-2013 AH75/85/100 aerial devices manufactured April 2005 through April 2013; and equipped with current leakage monitoring systems. The cable for the current leakage monitoring system may be too long and may breach the gap provided by the lower boom fiberglass insert chassis insulating system.
Risk: If the gap is breached, then the boom may conduct electrical current, increasing the risk of electrical shock to the operator.
Remedy: Altec will notify owners and dealers will inspect and properly secure the leakage monitor cable. The recall is expected to begin during September 2013. Altec's recall number is CSN 585. Owners may contact Altec at 1-877-462-5832.
- EQUIPMENT#13V275000
Altec Industries, Inc. (Altec) is recalling certain model year 2002-2010 AH75, AH85 and AH100 aerial devices equipped with square pedestals. In the affected vehicles, the aerial device may develop cracks between the pedestal and the unit subbase.
Risk: Cracks in the pedestal may cause the aerial device to fail, increasing the risk of personal injury.
Remedy: Altec will notify owners informing them to inspect the pedestal and if any cracks are found, they will be repaired free of charge. The recall began on August 5, 2013. Owners may contact Altec at 1-800-860-0183. Altec's recall number is CSN 580.
- EQUIPMENT#11V498000
ALTEC IS RECALLING CERTAIN MODEL YEAR 2010 AH75, AH85 AND AH100 AERIAL DEVICES MANUFACTURED FROM JUNE 29, 2010, THROUGH DECEMBER 26, 2010, FOR FAILURE OF THE PLATFORM LEVELING SYSTEM.
Risk: FAILURE OF THE PLATFORM LEVELING SYSTEM CAN RESULT IN UNINTENDED PLATFORM MOVEMENT INCREASING THE RISK OF DEATH OR SERIOUS INJURY.
Remedy: ALTEC WILL NOTIFY OWNERS, AND ALTEC DEALERS WILL MODIFY THE PLATFORM LEVELING SYSTEM AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 4, 2011. OWNERS MAY CONTACT ALTEC AT 1-877-GO-ALTEC (1-877-462-5832) FOR MORE INFORMATION.
Does this recall apply to my vehicle?
Matched by make, model, and model year. Many recalls affect only specific VIN ranges — confirm with your dealer using your full VIN.
What to do
Recall repairs are free at a franchised dealer in both countries. To confirm a recall applies to your specific vehicle, or to book the work, contact your manufacturer or dealer with your full VIN, or use the official channel:
- NHTSA recall lookup (search by VIN) — U.S. National Highway Traffic Safety Administration
- Defects and recalls database — Transport Canada
Check a 2010 Altec AH85 VIN
A VIN decode confirms your vehicle's exact model year, trim and assembly plant, then runs this same recall check against it.