Rappels 2012 Workhorse W62

• Groupe motopropulseur#201441018 septembre 2014

  227 unités visées

  Sur certains véhicules, une soudure sur le tuyau primaire côté passager pourrait se fatiguer et se briser. Cela pourrait causer le rejet de gaz d'échappement chauds dans le compartiment du moteur, ce qui pourrait augmenter les risques d'un incendie blessant quelqu'un ou endommageant des biens matériels. Correction : Les concessionnaires devront inspecter les tuyaux primaires et remplacer ceux qui sont fissurés. Des supports devront être posés sur les deux tuyaux primaires, ainsi qu'une barre anti­rapprochement pour le catalyseur, pour empêcher le mouvement de va-et-vient et la fatigue qui en résulterait.

Données canadiennes mises à jour : 24 août 2026

• ENGINE AND ENGINE COOLING:EXHAUST SYSTEM#14V574000en anglais seulement19 septembre 2014

  Navistar, Inc. (Navistar) is recalling certain model year 2011-2012 Workhorse W62 Commercial Chassis manufactured June 21, 2010, to October 2, 2012. In the affected vehicles, the weld joining the right hand side exhaust down pipe to the exhaust manifold may fatigue.

  Risque: A failure of the weld may allow hot exhaust gases to enter the engine compartment, increasing the risk of a fire.

  Correctif: Navistar will notify owners, and dealers will install support brackets on the right and left hand exhaust down pipes and a catalyst spacer bar to prevent swaying. Any cracked down pipes will be replaced. These repairs will be performed free of charge. The recall began on November 17, 2014. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 61401-C.

• SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS#13V512000en anglais seulement17 octobre 2013

  Navistar, Inc. is recalling certain model year 2012 Workhorse Custom Chassis W42 and W62 vehicles, manufactured from July 13, 2012, through October 12, 2012, and equipped with hydraulic brakes. In the affected vehicles, the brake fluid level indicator (FLI) may not properly detect a low brake fluid level situation and warn the driver.

  Risque: Without a warning, the driver may be unaware that the brake fluid level is low. A low brake fluid level may reduce the available braking force which could lengthen the required stopping distance and increase the risk of a crash.

  Correctif: Navistar has notified owners, and dealers will replace the FLI switch free of charge. Owners may contact Navistar at 1-800-448-7825. Navistar's recall campaign number is 51302-C.

• SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER#13V054000en anglais seulement20 février 2013

  Navistar is recalling certain model year 2011-2012 Workhorse Custom Chassis W42 and W62 vehicles, manufactured from July 18, 2011, through July 12, 2012, and equipped with hydraulic brakes. The brake fluid level indicator (FLI) may not properly detect a low brake fluid level situation and warn the driver.

  Risque: Without a warning, the driver may be unaware that the brake fluid level is low. A low brake fluid level may reduce the available braking force which could lengthen the required stopping distance and increase the risk of a crash.

  Correctif: Navistar will notify owners, and dealers will replace the FLI switch free of charge. The safety recall began on April 26, 2013. Owners may contact Navistar at 1-800-448-7825. Navistar's recall campaign number is 51301-C.