Rappels 2016 Mazda CX-5

• Feux et instruments#20200406 février 2020

  6 983 unités visées

  Problème : Sur certains véhicules équipés de feux de jour à DEL, le joint d'étanchéité du connecteur de câblage n'a pas été fabriqué avec le bon matériau, ce qui pourrait provoquer la corrosion de la carte de circuit imprimé et ainsi provoquer le clignotement et/ou la défaillance d'un ou des deux feux de jour. Risques pour la sécurité : Des feux de jour qui ne fonctionnent pas pourraient rendre le véhicule moins visible pour les autres et augmenter les risques de collision. Mesures correctives : Mazda Canada doit aviser les propriétaires par la poste et leur demander d'amener leur véhicule chez un concessionnaire pour le faire inspecter. Les concessionnaires remplaceront le joint d'étanchéité et ajouteront un matériau anticorrosion à l'intérieur des phares, si nécessaire. Les concessionnaires peuvent également remplacer les phares s'ils sont défectueux en raison de ce problème.

• Structure#20164316 septembre 2016

  183 808 unités visées

  Sur certains véhicules, le traitement anticorrosion du tube extérieur des dispositifs de retenue du hayon élévateur arrière pourrait être insuffisant. Au fil du temps, le tube extérieur des dispositifs de retenue du hayon élévateur arrière pourrait se corroder et se détacher, ce qui pourrait augmenter les risques de blessures. Correction : Les concessionnaires devront remplacer les deux dispositifs de retenue du hayon.

• Suspension#20161528 avril 2016

  220 unités visées

  Sur certains véhicules, l'écrou et le boulon qui retiennent la jambe de force sur l'articulation pourraient ne pas avoir été bien serrés lors de la construction. Au fil du temps, la jambe de force pourrait se séparer de l'articulation, ce qui causerait une perte de contrôle de la direction qui augmenterait les risques d'accident pouvant entraîner des blessures ou des dommages matériels (ou les deux). Correction : Les concessionnaires devront inspecter l'écrou et le boulon qui retiennent la jambe de force sur l'articulation, ainsi que les remplacer s'ils sont desserrés.

Données canadiennes mises à jour : 24 août 2026

• EXTERIOR LIGHTING:HEADLIGHTS#20V063000en anglais seulement6 février 2020

  Mazda North American Operations (Mazda) is recalling certain 2016 CX-5 vehicles. The LED Daytime Running Lights (DRL) may fail while driving.

  Risque: If the DRL fails, the vehicle's visibility may be reduced to other drivers on the road, increasing the risk of a crash.

  Correctif: Mazda will notify owners, and dealers will inspect the headlights, and replace the sealing gasket or headlight assemblies, as necessary, free of charge. The recall began March 20, 2020. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 4320A.

• STRUCTURE:BODY:HATCHBACK/LIFTGATE#16V644000en anglais seulement6 septembre 2016

  Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.

  Risque: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.

  Correctif: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.

• STEERING#16V203000en anglais seulement11 avril 2016

  Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.

  Risque: If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.

  Correctif: Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.

• FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP#16V064000en anglais seulement3 février 2016

  Mazda North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda CX-5 vehicles manufactured June 27, 2013, to February 2, 2016. The affected vehicles have a fuel filler pipe that may rupture in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 301, "Fuel System Integrity."

  Risque: A rupture of the fuel filler pipe may result in a fuel leak, increasing the risk of a fire.

  Correctif: Mazda will notify owners, and dealers will alter the attachment between the fuel filler pipe and the left rear side of the bracket of the fuel filler pipe, free of charge. The recall began on February 25, 2016. Owners may contact Mazda customer service at 1-800-222-5500, option 6. Mazda's number for this recall is 9216B.

• VISIBILITY:WINDSHIELD#16E002000en anglais seulement19 janvier 2016

  Pilkington North America, Inc. (Pilkington) is recalling certain replacement windshields, model FW04026 GTY, manufactured November 23, 2015, to December 16, 2015 for use in Mazda CX-5 vehicles that are equipped with the Smart City Brake Support system. The affected windshields have a bracket mounted on the inside to hold a laser sensor or LIDAR device for the Smart City Brake Support system. These brackets were improperly affixed with only tape instead of tape and urethane and therefore may loosen.

  Risque: If the bracket loosens or detaches from the windshield, the safety features of the Smart City Brake Support system may be disabled and therefore increase the risk of a crash.

  Correctif: Pilkington will contact the wholesalers and retailers that purchased the windshields to try to identify the affected customers. The affected windshields will be replaced, free of charge. This recall began on February 15, 2016. Owners may contact Pilkington at 1-844-278-7230.