Aller au contenu
VINscan

RAPPELS — MARQUE · MODÈLE · ANNÉE

Rappels 2013 Kenworth W900

12 campagnes de rappel de sécurité ont été déposées pour le 2013 Kenworth W900 auprès de Transports Canada et de la NHTSA américaine. Voici ce que disent les deux agences.

Rappels canadiens
05
Rappels américains
07
Total des campagnes
12

Rappels de Transports Canada

05
  • Feux et instruments#2020148

    65 284 unités visées

    Problème : Sur certains camions, le témoin du système de freinage antiblocage (ABS) du tracteur pourrait ne pas s'allumer s'il perd de sa puissance. Si cela se produisait, le conducteur ne serait pas averti que l'ABS ne fonctionne pas correctement. Remarque : Ce problème pourrait également empêcher les témoins du système d'antipatinage à l'accélération et du contrôle électronique de stabilité (ESC) de s'allumer. Risques pour la sécurité : Si le conducteur n'est pas averti que l'ABS ne fonctionne pas correctement, les risques de collision peuvent être accrus. Mesures correctives : PACCAR doit aviser les propriétaires par la poste et leur demander d'emmener leur camion chez un concessionnaire pour faire mettre à jour le logiciel du module de contrôle de la cabine (CECU).

  • Moteur#2015211

    169 unités visées

    Sur certains véhicules munis d'un moteur Cummins Westport ISL-G, une pression excessive dans le carter du moteur pourrait causer le détachement du coude du tube de mise à l'air libre du reniflard. Cela pourrait permettre à de l'huile moteur d'entrer en contact avec des surfaces chaudes, ce qui augmenterait les risques de déclenchement d'un feu pouvant entraîner des blessures ou des dommages matériels (ou les deux). Correction : Les concessionnaires devront installer des colliers aux deux extrémités du coude du tube de reniflard, ainsi que reprogrammer le module de commande électronique en vue d'améliorer les capacités de diagnostic.

  • Circuit électrique#2015190

    22 815 unités visées

    Sur certains véhicules, de l'eau pourrait se diriger vers la tête du moteur des essuie-glaces et causer de la corrosion à l'intérieur. Cette corrosion pourrait former un siphon conducteur, lequel pourrait causer un court-circuit et rendre le système d'essuie-glaces non fonctionnel. La perte d'essuie-glaces par temps pluvieux ou neigeux pourrait nuire à la vision du conducteur, et le court-circuit pourrait augmenter les risques de feu causant des blessures ou des dommages aux biens. Correction : Les concessionnaires doivent installer un écran protecteur par-dessus le moteur des essuie-glaces pour le protéger contre les infiltrations d'eau et ainsi empêcher la corrosion de ses composantes.

  • Groupe motopropulseur#2012285

    143 unités visées

    Sur certains camions, les boulons de fixation des arbres de transmission pourraient ne pas avoir été adéquatement serrés lors du montage du véhicule. Si les dispositifs de fixation se desserraient et tombaient, un arbre de transmission pourrait se détacher du véhicule. Cela entraînerait une perte de propulsion du véhicule qui, en conjoinction avec la densité de la circulation, l'état de la route et les réactions du conducteur, pourrait augmenter les risques d'accident. De plus, un arbre de transmission qui se détacherait du véhicule pourrait percuter un autre véhicule, un objet stationnaire ou une personne se trouvant à proximité. Cela pourrait endommager des biens matériels ou blesser quelqu'un. Correction : Les concessionnaires devront serrer les dispositifs de fixation du joint universel des deux arbres de transmission au couple de serrage prescrit.

  • Freins#2012027

    1 434 unités visées

    Sur certains camions munis de soupapes de relais antiblocage Bendix ATR-6, lorsqu'il fait très froid (température égale ou inférieure à -18 °C), une fuite interne au niveau des soupapes ATR pourrait se produire. Cela pourrait faire en sorte que les freins se serrent subitement, ce qui pourrait faire surchauffer les freins visés et causer un incendie. De plus, dans certains conditions de faible adhérence, un serrage inattendu des freins pourrait causer une perte de contrôle du véhicule et un accident. Ces problèmes pourraient endommager des biens matériels ou blesser quelqu'un. Correction : Les concessionnaires devront mettre à jour le couvercle sur les soupapes ATR.

Données canadiennes mises à jour : 24 août 2026

Rappels de la NHTSA (É.-U.)

07
  • SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK#24V145000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

    Risque: Insufficient air volume can reduce braking performance and increase the risk of a crash.

    Correctif: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

  • ELECTRONIC STABILITY CONTROL (ESC)#20V199000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

    Risque: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

    Correctif: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

  • ENGINE AND ENGINE COOLING:ENGINE#15V309000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.

    Risque: If engine oil comes into contact with a hot surface, there is an increased risk of a fire.

    Correctif: Cummins will notify owners on behalf of PACCAR, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 12, 2015. Owners may contact Kenworth customer service at 1-425-828-5000, Peterbilt customer service at 1-940-591-4000 or Cummins Inc. at 1-800-343-7357. PACCAR's number for this recall is 15KWH and 515-G.

  • VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR#15V271000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.

    Risque: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.

    Correctif: PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.

  • SERVICE BRAKES#13V573000en anglais seulement

    PACCAR is recalling certain model year 2007-2014 Kenworth T800 and W900 trucks manufactured March 22, 2006, through July 15, 2013 and equipped with Primaax tridem rear suspensions and a pusher and/or tag axle. The affected trucks have brake chambers that take longer to apply or release the brakes than the required time limit. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 121, "Air Brake Systems."

    Risque: Brakes that take longer to apply may lengthen the distance needed to stop the truck, increasing the risk of a crash.

    Correctif: PACCAR will notify owners, and dealers will modify the air brake system, free of charge. The recall began on January 15, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's recall number is 13KWL.

  • POWER TRAIN:DRIVELINE#12V407000en anglais seulement

    Paccar is recalling certain model year 2013 kenworth T400, T600, T700, T800, and W900 vehicles, manufactured from July 18, 2012, through August 10, 2012. Cap screws securing the main driveline to the forward rear axle and cap screws on the inter-axle driveline may not have been properly torqued.

    Risque: Fasteners which are not properly torqued to specification can result in the driveline separating from the vehicle, disabling the vehicle and increasing the risk of a crash. The separated component could also become a road hazard.

    Correctif: Paccar will notify owners, and dealers will inspect and re-torque the each of the affected fasteners, free of charge. The safety recall began on September 7, 2012. Owners may contact Kenworth at 1-425-828-5440.

  • SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE#12V026000en anglais seulement

    PACCAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 KENWORTH T170, T270, T370, T440, T470, T660, T700, T800, W900, AND PETERBILT 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, AND 587 VEHICLES, MANUFACTURED FROM JANUARY 31, 2011, THROUGH JANUARY 19, 2012, AND EQUIPPED WITH BENDIX ATR-6 ANTILOCK TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.

    Risque: UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH. ALSO, THE BRAKES MAY BE APPLIED WITHOUT ILLUMINATING THE BRAKE LIGHTS, FAILING TO GIVE PROPER WARNING TO OTHER DRIVERS.

    Correctif: PACCAR WILL NOTIFY OWNERS, AND PROVIDE A TEMPORARY REPAIR UNTIL BENDIX DEVELOPS A PERMANENT REMEDY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 10, 2012. OWNER MAY CONTACT KENWORTH AT 1-425-828-5440 AND PETERBILT AT 1-940-591-4196.

Ce rappel vise-t-il mon véhicule?

Association par marque, modèle et année-modèle. Plusieurs rappels ne visent que certaines plages de NIV — confirmez auprès de votre concessionnaire avec votre NIV complet.

Quoi faire

Les correctifs de rappel sont gratuits chez un concessionnaire franchisé dans les deux pays. Pour confirmer qu'un rappel vise votre véhicule précis ou pour prendre rendez-vous, adressez-vous à votre fabricant ou concessionnaire avec votre NIV complet, ou utilisez le canal officiel :

Vérifier un NIV de 2013 Kenworth W900

Un décodage de NIV confirme l'année-modèle, la version et l'usine exactes de votre véhicule, puis relance cette même recherche de rappels.

Sources de données et limites de couverture