RAPPELS — MARQUE · MODÈLE · ANNÉE
Rappels 2015 Kenworth T440
13 campagnes de rappel de sécurité ont été déposées pour le 2015 Kenworth T440 auprès de Transports Canada et de la NHTSA américaine. Voici ce que disent les deux agences.
- Rappels canadiens
- 06
- Rappels américains
- 07
- Total des campagnes
- 13
Rappels de Transports Canada
06- Feux et instruments#2015316
4 791 unités visées
Certains véhicules munis de phares DHI pourraient ne pas satisfaire aux exigences de la norme de sécurité des véhicules automobiles du Canada (NSVAC) 108 – Système d'éclairage et dispositifs rétroréfléchissants. Un feu de jour combiné optiquement à un indicateur de changement de direction doit s'éteindre lorsque l'indicateur de changement de direction est allumé en tant que feu de détresse. Dans les véhicules touchés, le feu de jour a priorité sur la fonction de feux de détresse si on actionne le frein de service pendant plus de 2 secondes, ce qui va à l'encontre des exigences de la norme. La fonction de feux de détresse redevient normale lorsqu'on cesse d'actionner le frein de service. Cela n'a aucune incidence sur la fonction de clignotants. L'impossibilité d'utiliser les feux de détresse pour avertir les véhicules qui arrivent en sens inverse pourrait augmenter les risques d'accident pouvant entraîner des blessures ou des dommages matériels (ou les deux). Correction : Les concessionnaires devront mettre à jour le logiciel du véhicule.
- Moteur#2015211
169 unités visées
Sur certains véhicules munis d'un moteur Cummins Westport ISL-G, une pression excessive dans le carter du moteur pourrait causer le détachement du coude du tube de mise à l'air libre du reniflard. Cela pourrait permettre à de l'huile moteur d'entrer en contact avec des surfaces chaudes, ce qui augmenterait les risques de déclenchement d'un feu pouvant entraîner des blessures ou des dommages matériels (ou les deux). Correction : Les concessionnaires devront installer des colliers aux deux extrémités du coude du tube de reniflard, ainsi que reprogrammer le module de commande électronique en vue d'améliorer les capacités de diagnostic.
- Circuit électrique#2015190
22 815 unités visées
Sur certains véhicules, de l'eau pourrait se diriger vers la tête du moteur des essuie-glaces et causer de la corrosion à l'intérieur. Cette corrosion pourrait former un siphon conducteur, lequel pourrait causer un court-circuit et rendre le système d'essuie-glaces non fonctionnel. La perte d'essuie-glaces par temps pluvieux ou neigeux pourrait nuire à la vision du conducteur, et le court-circuit pourrait augmenter les risques de feu causant des blessures ou des dommages aux biens. Correction : Les concessionnaires doivent installer un écran protecteur par-dessus le moteur des essuie-glaces pour le protéger contre les infiltrations d'eau et ainsi empêcher la corrosion de ses composantes.
- Freins#2014590
218 unités visées
Sur certains véhicules, un ou des diaphragmes de récepteur de frein pourraient ne pas être adéquatement assis. Cela pourrait mener à du freinage résiduel, ce qui causerait une surchauffe des freins ou un serrage non voulu de frein à ressort. Ces problèmes pourraient augmenter les risques d'un accident blessant quelqu'un ou endommageant des biens matériels. Correction : Les concessionnaires devront remplacer le récepteur de frein.
- Système d'alimentation en carburant#2014339
199 unités visées
Sur certains véhicules munis d'un moteur Cummins ISB ou ISL, l'écrou d'ancrage et la coque du filtre à carburant pourraient se détacher, ce qui causerait une fuite de carburant et le calage du moteur. Le calage du moteur résulterait en une perte de puissance motrice, ce qui augmenterait les risques d'un accident qui pourrait blesser quelqu'un ou endommager des biens matériels. Correction : Les concessionnaires devront remplacer le filtre à carburant.
- Moteur#2014046
82 unités visées
Sur certains véhicules munis des moteurs Cummins ISL G ou ISX12 G, une programmation incorrecte de l'unité de contrôle électronique du moteur pourrait faire monter la température du système d'échappement lorsqu'il fonctionne par temps froid. Ceci pourrait également causer l'apparition de flammes dans le système d'échappement. Ainsi des matières combustibles à proximité pourraient s'enflammer, augmentant le risque d'un incendie, de blessures et/ou de dommages matériaux. Correction : Les installations d'entretien Cummins autorisées devront mettre à jour la programmation logicielle.
Données canadiennes mises à jour : 24 août 2026
Rappels de la NHTSA (É.-U.)
07- SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK#24V145000en anglais seulement
PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
Risque: Insufficient air volume can reduce braking performance and increase the risk of a crash.
Correctif: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.
- EXTERIOR LIGHTING:HAZARD FLASHING WARNING LIGHTS#15V458000en anglais seulement
PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T440, T470, T660, T680, and T880 trucks manufactured January 14, 2010, to May 22, 2015, and equipped with HID Headlamps and the option for Daytime Running Lamps (DRL). The DRLs are required to deactivate when the hazard warning lights are activated, however, the DRLs on these vehicles override the hazard flashing functionality after the brake pedal is pushed for more than two seconds. Normal hazard flashing functionality returns once the service brake is released. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment."
Risque: If the hazard warning lamps are overridden by the DRL, oncoming vehicles may fail to be warned, increasing the risk of a crash.
Correctif: Kenworth will notify owners, and dealers will update the cab controller software, free of charge. The recall began on September 167, 2015. Owners may contact Kenworth customer service at 1-425-828-5000. Kenworth's number for this recall is 15KWL.
- ENGINE AND ENGINE COOLING:ENGINE#15V309000en anglais seulement
PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.
Risque: If engine oil comes into contact with a hot surface, there is an increased risk of a fire.
Correctif: Cummins will notify owners on behalf of PACCAR, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 12, 2015. Owners may contact Kenworth customer service at 1-425-828-5000, Peterbilt customer service at 1-940-591-4000 or Cummins Inc. at 1-800-343-7357. PACCAR's number for this recall is 15KWH and 515-G.
- VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR#15V271000en anglais seulement
PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
Risque: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.
Correctif: PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.
- PARKING BRAKE:CONVENTIONAL:AIR#14V810000en anglais seulement
PACCAR Incorporated (PACCAR) is recalling certain model year 2015 Peterbilt 367, 389, 567, 579, and 587 trucks manufactured from May 23, 2014, to February 13, 2015, and 2015 Kenworth T270, T370, T440, T470, T660, T680, T800, T880, and W900 trucks manufactured from May 23, 2014, to February 13, 2015, equipped with certain air brake actuators. The affected vehicles may experience brake drag due to an improperly seated diaphragm in the brake chamber.
Risque: Brake drag may result in a wheel end fire.
Correctif: Kenworth and Peterbilt will notify owners, and dealers will inspect and replace the brake chamber, as necessary, free of charge. An interim notice was mailed to owners March 3, 2015. The recall began on May 14, 2015. Owners may contact PACCAR customer service at 1-425-828-5000 (Kenworth), or 1-940-591-4000 (Peterbilt). PACCAR's number for this recall is 14KWP (Kenworth), and 1214L (Peterbilt).
- FUEL SYSTEM, DIESEL#14V486000en anglais seulement
PACCAR Incorporated (PACCAR) is recalling certain model year 2015 Kenworth K270, T270, K370, T370, T440, T470, and W900 chassis manufactured May 13, 2014, to July 23, 2014, and certain model year 2015 Peterbilt 210, 220, 320, 325, 330, 337, 348, 365, 382, 384, and 567 chassis manufactured May 8, 2014, to July 22, 2014. The Cummins ISB or ISL engines in these vehicles may have been equipped with Fleetguard UFF-XT fuel filters, part number FF63009, whose filter shell may separate from the fuel filter nut plate causing the engine to stall without warning.
Risque: If the engine stalls unexpectedly there is an increased risk of a crash.
Correctif: Cummins will notify owners on behalf of PACCAR, and Cummins dealers will replace the fuel filter with a non-defective one, free of charge. The notification schedule for this recall ran July 29 to December 31, 2014. Owners may contact Kenworth customer service at 1-425-828-5000, or Peterbilt customer service at 1-940-591-4000. Owners may also contact Cummins customer service at 1-812-377-3713. Kenworth's number for this recall is 14KWJ. Peterbilt's number for this recall is 814-H.
- ENGINE AND ENGINE COOLING:ENGINE#14V086000en anglais seulement
PACCAR Inc, is recalling certain model year 2014-2015 Kenworth T440, T660, T800, and W900 tractor trailers manufactured January 23, 2013, through February 4, 2014, and certain model year 2014-2015 Peterbilt 320, 365, 382, 384 tractor trailers manufactured January 21, 2013, through February 5, 2014, and equipped with certain Cummins Westport Model ISL G and ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.
Risque: The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe.
Correctif: PACCAR will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began on April 12, 2014. Customers may contact PACCAR at 1-425-468-7400. Paccar's recall numbers associated with this campaign are 14KWG (Kenworth), and 214-C (Peterbilt).
Ce rappel vise-t-il mon véhicule?
Association par marque, modèle et année-modèle. Plusieurs rappels ne visent que certaines plages de NIV — confirmez auprès de votre concessionnaire avec votre NIV complet.
Quoi faire
Les correctifs de rappel sont gratuits chez un concessionnaire franchisé dans les deux pays. Pour confirmer qu'un rappel vise votre véhicule précis ou pour prendre rendez-vous, adressez-vous à votre fabricant ou concessionnaire avec votre NIV complet, ou utilisez le canal officiel :
- Recherche de rappels de la NHTSA (par NIV) — National Highway Traffic Safety Administration (É.-U.)
- Base de données des défauts et rappels — Transports Canada
Vérifier un NIV de 2015 Kenworth T440
Un décodage de NIV confirme l'année-modèle, la version et l'usine exactes de votre véhicule, puis relance cette même recherche de rappels.