Aller au contenu
VINscan

RAPPELS — MARQUE · MODÈLE · ANNÉE

Rappels 2016 Kenworth T370

12 campagnes de rappel de sécurité ont été déposées pour le 2016 Kenworth T370 auprès de Transports Canada et de la NHTSA américaine. Voici ce que disent les deux agences.

Rappels canadiens
05
Rappels américains
07
Total des campagnes
12

Rappels de Transports Canada

05
  • Feux et instruments#2020148

    65 284 unités visées

    Problème : Sur certains camions, le témoin du système de freinage antiblocage (ABS) du tracteur pourrait ne pas s'allumer s'il perd de sa puissance. Si cela se produisait, le conducteur ne serait pas averti que l'ABS ne fonctionne pas correctement. Remarque : Ce problème pourrait également empêcher les témoins du système d'antipatinage à l'accélération et du contrôle électronique de stabilité (ESC) de s'allumer. Risques pour la sécurité : Si le conducteur n'est pas averti que l'ABS ne fonctionne pas correctement, les risques de collision peuvent être accrus. Mesures correctives : PACCAR doit aviser les propriétaires par la poste et leur demander d'emmener leur camion chez un concessionnaire pour faire mettre à jour le logiciel du module de contrôle de la cabine (CECU).

  • Accessoires#2017590

    19 unités visées

    Sur certains camions à incendie, les anneaux de retenue de la soupape de surpression pourraient ne pas avoir été faits d'acier inoxydable de haute qualité et pourraient se détériorer au fil du temps en raison d'une exposition fréquente à de l'eau. En cas de bris des anneaux de retenue, la soupape de surpression pourrait cesser de fonctionner et empêcher la pompe à incendie de produire une pression suffisante, ce qui pourrait augmenter les risques de blessures pendant les opérations de lutte contre les incendies. Mesure corrective : Les concessionnaires ou les techniciens certifiés devront inspecter les anneaux de retenue et les remplacer au besoin.

  • Direction#2017461

    281 unités visées

    Dans certains véhicules, l'écrou crénelé et la goupille fendue sur l'essieu directeur pourraient avoir été mal serrés. Par conséquent, la biellette de direction pourrait devenir lâche dans l'essieu directeur, ce qui provoquerait un son audible et/ou une direction lâche. Si le véhicule est utilisé dans cet état, la biellette de direction pourrait se détacher du joint d'articulation, ce qui causerait une perte complète de maîtrise d'une roue du véhicule. Cela augmenterait les risques d'accident pouvant entraîner des blessures ou des dommages matériels (ou les deux). Mesure corrective : Les concessionnaires devront vérifier le couple de serrage des écrous crénelés sur la biellette de direction, ainsi que remplacer le goujon de la biellette de direction et le joint d'articulation au besoin.

  • Moteur#2015418

    9 unités visées

    Sur certains véhicules munis d'un moteur Cummins, un court-circuit pourrait se produire à l'intérieur du module de commande du moteur et cela pourrait faire sauter un fusible dans le circuit d'alimentation électrique du module de commande du moteur. Cela pourrait causer un calage imprévu du moteur sans qu'il soit possible de redémarrer le moteur, ce qui pourrait augmenter les risques d'accident. Correction : Les concessionnaires devront remplacer le module de commande du moteur existant touché par un nouveau module de commande du moteur.

  • Circuit électrique#2015190

    22 815 unités visées

    Sur certains véhicules, de l'eau pourrait se diriger vers la tête du moteur des essuie-glaces et causer de la corrosion à l'intérieur. Cette corrosion pourrait former un siphon conducteur, lequel pourrait causer un court-circuit et rendre le système d'essuie-glaces non fonctionnel. La perte d'essuie-glaces par temps pluvieux ou neigeux pourrait nuire à la vision du conducteur, et le court-circuit pourrait augmenter les risques de feu causant des blessures ou des dommages aux biens. Correction : Les concessionnaires doivent installer un écran protecteur par-dessus le moteur des essuie-glaces pour le protéger contre les infiltrations d'eau et ainsi empêcher la corrosion de ses composantes.

Données canadiennes mises à jour : 24 août 2026

Rappels de la NHTSA (É.-U.)

07
  • SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK#24V145000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

    Risque: Insufficient air volume can reduce braking performance and increase the risk of a crash.

    Correctif: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

  • ELECTRONIC STABILITY CONTROL (ESC)#20V199000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

    Risque: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

    Correctif: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

  • EQUIPMENT#18V094000en anglais seulement

    Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting.

    Risque: A reduction in water pressure may hinder fire fighting efforts, increasing the risk of injury.

    Correctif: Ferrara will notify owners, and Ferrara certified dealers or technicians will replace the relief valve retaining ring with one that is stainless steel, free of charge. The recall began on February 12, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.

  • EQUIPMENT#17V739000en anglais seulement

    E-One Incorporated (E-One) is recalling certain 2013-2017 E-One Cyclone II, Quest, Typhoon, 2016 Freightliner M2 112, 2013-2015 International 7400, 2014-2017 International 4400, Freightliner M2 106, 2016-2017 Kenworth T370, and 2015 Kenworth T800 vehicles equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting.

    Risque: A reduction in water pressure may hinder fire fighting efforts, increasing the risk of injury.

    Correctif: E-One will notify owners, and a certified dealer or technician will install a stainless steel retaining ring, free of charge. The recall began on January 11, 2018. Owners may contact E-One customer service at 1-352-861-3612.

  • STEERING:LINKAGES:TIE ROD ASSEMBLY#17V593000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.

    Risque: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.

    Correctif: PACCAR will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. The recall began on November 13, 2017. Owners may contact Peterbilt customer service at 1-940-591-4000 or Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is P817-C.

  • ELECTRICAL SYSTEM:IGNITION:MODULE#15V597000en anglais seulement

    Paccar Incorporated (Paccar) is recalling certain model year 2016 Kenworth T370, T660, T680, T800, T880, and W900 vehicles manufactured July 31, 2015, to August 12, 2015, and 2016 Peterbilt 337, 348, 365, 367, 382, 386, 389, 567, 579, and 587 vehicles manufactured August 4, 2015, to August 12, 2015. In the affected vehicles, the Engine Control Module (ECM) may short circuit, causing the engine to stall without warning.

    Risque: An engine that stalls without warning increases the risk of a crash.

    Correctif: PACCAR will notify owners, and dealers will replace the defective engine control modules, free of charge. The recall began on October 22, 2015. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4000. Paccar's numbers for this recall are 15KWM (Kenworth) and 915-L (Peterbilt).

  • VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR#15V271000en anglais seulement

    PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.

    Risque: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.

    Correctif: PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.

Ce rappel vise-t-il mon véhicule?

Association par marque, modèle et année-modèle. Plusieurs rappels ne visent que certaines plages de NIV — confirmez auprès de votre concessionnaire avec votre NIV complet.

Quoi faire

Les correctifs de rappel sont gratuits chez un concessionnaire franchisé dans les deux pays. Pour confirmer qu'un rappel vise votre véhicule précis ou pour prendre rendez-vous, adressez-vous à votre fabricant ou concessionnaire avec votre NIV complet, ou utilisez le canal officiel :

Vérifier un NIV de 2016 Kenworth T370

Un décodage de NIV confirme l'année-modèle, la version et l'usine exactes de votre véhicule, puis relance cette même recherche de rappels.

Sources de données et limites de couverture